NEC VERSA 4200 Manual page 48

T
set up the selected on-line service on your NEC Versa 4200 computer
using an easy-to-follow setup program.
T
select the newly created on-line service icon, register with the service,
and begin your on-line adventure.
Just follow these steps to set up and use your selected on-line service:
1. Connect your (optional) modem card to a phone line.
Continue as follows:
2.
T
From the Program Manager in Windows for Workgroups, locate and
double click on the Online Install program group. Double click on the
icon for the service you want to install.
T
In Windows 95, press Start, move to the Programs group, slide to On-
line Install, and slide to the on-line service group that you want to in-
stall. Tap the VersaGlide pad once or click once.
The setup screen for the selected on-line service displays. Follow the on-
3.
screen instructions to install the service on your NEC Versa.
For both Windows for Workgroups and Windows 95, a program group
will be created for your selected on-line service.
To use the selected on-line service, follow the on-screen instructions to
4.
log onto the service.
NOTE
your NEC Versa prior to running the on-line service setup program.
As part of the setup program, it recognizes your modem information.
If you run the setup program without an installed modem, you will
have to manually enter the modem information the first time you
use the on-line service.
2-12 Introducing the Software
It is strongly recommended that you install the modem card in