Starting The Dell Diagnostics From The Drivers And Utilities Media - Dell XPS ONE MTG Owner's Manual

3 When the DELL™ logo appears, press <F12> immediately. Select
Diagnostics from the boot menu and press <Enter>.
NOTE:
wait until you see the Microsoft
computer and try again.
NOTE:
been found, run the Dell Diagnostics from the Drivers and Utilities media.
4 Press any key to start the Dell Diagnostics from the diagnostics utility
partition on your hard drive.
Starting the Dell Diagnostics From the Drivers
and Utilities Media
1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE:
to wait until you see the Microsoft
computer and try again.
NOTE:
next start-up, the computer boots according to the devices specified in the
system setup program.
3 When the boot device list appears, highlight CD/DVD/CD-RW and press
<Enter>.
4 Select the Boot from CD-ROM option from the menu that appears and
press <Enter>.
5 Type 1 to start the CD menu and press <Enter> to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
multiple versions are listed, select the version appropriate for your
computer.
7 When the Dell Diagnostics Main Menu appears, select the test you want
to run.
66
Dell Diagnostics
If you wait too long and the operating system logo appears, continue to
If you see a message stating that no diagnostics utility partition has
If you wait too long and the operating system logo appears, continue
The next steps change the boot sequence for one time only. On the
® ®
Windows desktop; then, shut down your
® ®
Windows desktop; then, shut down your