Dell XPS ONE MTG Owner's Manual page 19

8 computer sync
button
9 network adapter
connector
10 optional TV input-
device connector
11 TV-in connector
12 2.0 audio out
connector
13 power connector
14 USB 2.0
connectors (4)
To re-sync your optional wireless keyboard and mouse to
your computer, press the sync button on the rear of your
computer, then press the sync button on the device that
you wish to use. See "Re-Syncing Your Optional Wireless
Mouse or Keyboard with Your Computer" on page 44.
To attach your computer to a network or broadband device,
connect one end of a network cable to either a network port
or your network or broadband device. Connect the other
end of the network cable to the network adapter connector
on the back panel of your computer. A click indicates that
the network cable has been securely attached.
NOTE:
Do not plug a telephone cable into the network
connector.
network activity light: Flashes a yellow light when the
computer is transmitting or receiving network data. A high
volume of network traffic may make this light appear to be
in a steady "on" state.
link integrity light:
Green — A good connection exists between the network
and the computer.
Off — The computer is not detecting a physical
connection to the network.
10-pin connector to attach the optional TV-input device.
The device is only necessary if you will not be connecting
your TV via the optional TV-in connector.
TV input-device connectors: S-video, composite video, and
audio connectors, and IR blaster.
TV-in connector — only supported on systems with
optional TV tuner card.
Connect speakers for 2.0 audio.
Insert the power cable.
Use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.
It is recommended that you use the side USB connectors
for devices that you connect occasionally, such as joysticks
or cameras.
About Your Computer
19