NEC SILENTWRITER SUPERSCRIPT 660 User Manual page 110

5–6 Print Status Window
user and after correction, the page will be
reprinted. Holding the page in memory and
waiting for it to print will slow down the
printer.
When disabled Page Save Mode will discard
the current page from memory once it has
been sent to the printer. This allows the next
page to begin processing as soon as possible.
Certain printer errors which occur after the
data has been sent to the printer (i.e.. paper
exit jam) may be reported with the next page
to be printed. The default is OFF.
Power Saving Mode:
This feature reduces the power consumption
of the printer. Turn ON and select the time
period the printer must be idle before the
printer will go into Power Saving Mode.
Turn OFF if you require a quick response
from the printer and do not wish to wait for
the printer to warm up prior to printing. The
default is ON at 15 minutes.
Toner Saving Mode:
This feature saves toner by controlling the
print density. The default is off.
Print Darkness:
This feature controls the overall print dark-
ness of a whole page as required.
Connect Port:
Allows you to select the port which the
printer is connected to.