T
configure system connections for peripherals such as
your diskette drive, hard disks, and devices connected to
the printer port and serial ports.
T
customize your system with security features such as
passwords, diskette drive restriction, virus check
reminder, and system backup reminder.
T
set system parameters in the event that you need to
replace the complementary metal oxide semiconductor
(CMOS) battery.
How to Start Setup
To start the Setup utility, follow these steps:
Turn on or reboot the system.
1.
2.
To start the memory test before the system boots up,
press
There is about five seconds in which to press
the system boot continues.
3.
Setup's Main Menu appears and looks similar to the
following screen.
after POST.
F2
NECCSD Tools and Utilities 4-3
F2
before