ROLEC ROLEC5000 Installation & Operation Manual page 3

IMPORTANT: This product is designed to be used with a charge point
management system (CPMS) sometimes referred to as a 'Back Office'.
Administration tasks to set this up with the CPMS can sometimes take
several days to be processed and ideally this should be done before the
charge point is installed.
If this has not been done, please refer to the Payment Device Setup Guide
included with the product or available from the Rolec downloads page:
https://www.rolecserv.com/downloads-ev-charging.
Contents
Product Support
Safety
Safety Advice within this Manual
About this Manual
Tap & Charge Overview
Product Features
Specification
Unpacking
Standard Contents
Options and Accessories
Installation
BEFORE Installation
If a Mounting Post or Pedestal will be Used
Install the Tap & Charge Payment Terminal
About Payment Terminals
EVTCM-V01-R0 Installation Manual
November 2024
Product Support
Tap & Charge Remote Contactless Payment Terminal
1
3
3
3
4
4
5
7
7
7
8
8
9
10
12
Page 2 of 12