Download Print this page

WatchGas AIRWATCH MK 1.2 Quick Start Manual

Hide thumbs Also See for AIRWATCH MK 1.2:

Advertisement

Quick Links

SST4 MICRO & SST4 MINI
Multi-gas device
QUICK START GUIDE
AirWatch components
1.Status LED Green
/
4.Status LED Red
/
7.On/Off and contact A (with use of magnetic key)
/
8.SN
/
9. Alarm reset and contact B (with use of
magnetic key)
gland Precut
Outlet
/
15.DC Desktop (only use for maintanance)
WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com
WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com
/
2.USB
/
5.SD Card Slot
/
10.Gas Inlet
/
13.7 Pins DC Power in Relay out
AIRWATCH
/
3.Status LED Wireless
/
6.LCD display
/
11.Modbus
MK 1.2
/
12.Cable
/
14.Gas

Advertisement

loading
Need help?

Need help?

Do you have a question about the AIRWATCH MK 1.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for WatchGas AIRWATCH MK 1.2

  • Page 1 15.DC Desktop (only use for maintanance) WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 2 3-pin with battery clamps (cable type 2). Never open the device when its running. Shut off power and de-energize 15 minutes before opening the AirWatch. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 3 1ppm <300s Check AirWatch sensor specification for detailed sensor information. *For PH HR , H , ETO , please contact for availability. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 4 4. Activate ‘alarm reset’ to switch the AirWatch to measurement mode. 5. After the startup procedure you can test the pump by blocking the filter inlet. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 5: Freshair Calibration

    176s FreshAir calibration ? Calibrating. .( 90s left) 0. 0 20.9 Calibrating. .( 90s left) Calibration finished! LELC LELC 0. 0 20.9 WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 6 Stop Automatic) plug, can turn off a diesel-operated or electrical switch cabinet. A red LED on the AirWatch indicates that there is an alarm. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 7 LED is on continuously and the green LED is flashing. This Alarm reset is achieved by holding the magnetic key against the right side (contact B) of the AirWatch. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 8 Red LED is on continuously and green LED is flashing. The AirWatch can be reset with the alarm/reset button. Green LED. The AirWatch is in measure- ment mode. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 9 To adjust flow fault upper and lower settings follow the procedure below entering the manual menu. WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...
  • Page 10 The Netherlands AMERICAS 313 N. State Hwy 342 Red Oak, TX 75154 APAC Woods Square Tower 1, 12 Woodlands Square, #11-71, Singapore 737715 WatchGas | Klaverbaan 121 | 2908 KD Capelle aan den IJssel | The Netherlands | www.watchgas.com | info@watchgas.com...