Table of Contents
Advertisement
A Supervisor Password controls access to the BIOS and
Setup Utility program. If the Supervisor Password feature
has been enabled, a Supervisor password must be entered
correctly before all options in the Setup Utility program are
available (for example, to disable password protection).
When a Supervisor Password is enabled, access to
many features in the Setup Utility program is
restricted.
How to Set a Password
Use the following steps to select the password feature you
want to set.
Highlight the "Set User Password" or "Set Supervisor
1.
Password" field, then press the
Password or Set Supervisor Password dialog box
appears on your monitor.
2.
Type a password (up to seven alphanumeric characters)
in the Enter New Password field, then press the
key. Your password should be easy for you to
remember, but hard for others to guess.
Be careful when typing your password, because you
won't be able to see any of the characters you type.
Retype your password in the Confirm New Password
3.
field, then press the
!
WARNING
Enter
key. The Set User
!
WARNING
Enter
key.
System BIOS and Utilities 4-19
Enter
Advertisement
Table of Contents
