Advertisement

Quick Links

PRO GUIDE
/ JOIN'T 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JOIN'T5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Skywalk JOIN'T5

  • Page 1 PRO GUIDE / JOIN‘T 5...
  • Page 2: Table Of Contents

    Homologation 1 INTRODUCTION Closing Words Welcome to skywalk! Line Schematic Congratulations on the purchase of your new JOIN‘T5 and thank you for your trust in us and in our products. In this manual you will find product-specific information that will help you quickly get to know your new paraglider to ensure your fun for a long time.
  • Page 3: Description

    The skywalk JOIN’T5 has 3 A-, 3 B-, 3C-, 2D- and 1 stabilo line. The main-stabilo is connect- ed with the B-riser. The brake lines are not load-bearing and lead from the trailing edge over the main brake lines through the brake pulleys on the D-risers to the brake handles.
  • Page 4: Acceleration System

    WINCHTOWING THE EXTENDED BRAKE TRAVEL WILL IMPACT THE WING’S The skywalk JOIN´T5 is suited for winch towing. Make sure that you only use certified FLIGHT CHARACTERISTICS. IN CHALLENGING TAKEOFF winches and that you climb from the ground at a flat angle.
  • Page 5: Materials

    120 kg in the paraglider category. The many homologation tests are the last hurdle in the descends without flying forward. development of a skywalk paraglider. The homologation test flights only take place Pulling hard on the B-risers allows you to decrease the area of the wing and increase your when the test team is completely happy with the glider development.
  • Page 6: Closing Words

    PRO GUIDE // JOIN‘T5 10 CLOSING WORDS 11 LINE SCHEMATIC The skywalk JOIN‘T5 is at the pinnacle of paraglider development in the market for tan- This line schematic is only for dem gliders and shows what is possible regarding performance, safety and innovation.
  • Page 7: Risers

    PRO GUIDE // JOIN‘T5 13 RISERS 14 OVERVIEW GLIDER The difference between the measured riser lengths and the original riser lengths should not exceed ± 5mm. JOIN´T5 - 200, 220 and 240: 530 mm 455 mm 380mm 380mm 1 Main lines 2 Top lines 3 Bottom sail 4 Cell openings...
  • Page 8: Test Protocol

    PRO GUIDE // JOIN‘T5 TEST PROTOCOL Date: Examinations of the lines: Customer, Name: Firmness of main lines: Adress: Phone: Results [+/–]: Description of failure: Suggested repairs: Visual check of trimming: Checkflight necessary? Glider: Size: Serial number: Type certificate patch? Type certificate number: Date of last check: Identification plate? Date of first flight:...
  • Page 9: Pure Passion For Flying

    PRO GUIDE // JOIN‘T5 Skywalk GmbH & Co. KG Windeckstr. 4 | 83250 Marquartstein +49 (0) 8641/69 48 0 PURE PASSION FOR FLYING info@skywalk.org | www.skywalk.info...

Table of Contents