Ports; Rear Panel; Ac Power Socket - SMC Networks SMCFS2601 User Manual

| Hardware Description
C 2
HAPTER

Rear Panel

Table 1: System and Port Status LEDs (Continued)
LED Condition
1000M On Green
Off
RJ-45 P
ORTS
The switch contains 24 10/100 Mbps RJ-45 ports and 2 10/100/1000 Mbps RJ-
45 ports. All ports support automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs or servers, or to other
switches or hubs.
Each of these ports support auto-negotiation, so the optimum transmission
mode (half or full duplex), and data rate (10, 100 or 1000 Mbps) is selected
automatically.
Each port also supports IEEE 802.3x auto-negotiation of flow control, so the
switch can automatically prevent port buffers from becoming saturated.
R P
EAR ANEL
The rear panel of the switch features the AC power socket.
Figure 3: SMCFS2601 Switch Rear Panel
AC P S
OWER OCKET
Connect the female connector of the power cord to the socket on the switch, and
the male connector to the AC power outlet. Make sure the voltage of the power
supply meets the requirement of the input voltage.
Status
The port is operating at 1000 Mbps.
The port is operating at 10 or 100 Mbps.
– 14 –
100-240V~ 50/60Hz 0.6A