Alpha Moisture Systems DS1200 User Manual page 5

Model DS1200-AMT-Ex
1.1 Defini ons
• Hazardous voltages have been defined as the ranges: 75 to 1500 volt DC, and
50 to 1000v volt AC.
• Technicians are qualified persons educated or trained to mount, operate,
troubleshoot and technically correct in accordance with safety regula
• Operators are persons being familiar with the content of this manual, able to
adjust and operate the Model DS1200-AMT-Ex during normal opera
1.2 Receipt and Unpacking
Unpack the Model DS1200-AMT-Ex when it is ready to install and without damaging it.
•
Always follow the manual and ensure it is always accessible to the installer and
operator .
• Check at the receipt of the Model DS1200-AMT-Ex whether the type corresponds
to the one ordered.
1.3 Environment
• Avoid direct sunlight, dust, high temperatures, mechanical vibra
as well as rain and heavy moisture. If avoidance of high moisture is not possible,
employ ven
• The Model DS1200-AMT-Ex falls under the installa
Degree 1, and Insula
1.4 Normal Opera
• Operators are only allowed to adjust and operate the Model DS1200-AMT-Ex when
safely fixed to a panel, thus avoiding the danger of personnel injury and damage.
This means there is no electrical shock hazard, and the Model DS1200 front panel is
easily accessible.
1.5 Cleaning
• When disconnected, the Model DS1200 may be cleaned with a cloth moistened
with dis lled water or ethyl alcohol.
2148 - Iss 6 - 10/23
la on, rather than increased temperature to prevent condensa
on Class II.
on
Model 6020
on Category II, pollu
ons.
on.
ons and shock,
on.
on
3