SMC Networks BARRICADE SMC7301TA User Manual page 28

Step 3: Set Multilink Usage parameters. This determines how the
SMC7301TA utilizes the two B channels for your Internet connection.
Available options are:
One B Channel Only: SMC7301TA will only use one B channel.
Two B Channels Only When Needed: SMC7301TA will initiate a connection
with one B channel, and bring up the other B channel only if the traffic
increases to a point when more bandwidth is n eeded.
Always two B Channels: SMC7301TA will always establish both B Channels
to access the Internet.
Step 4: Select Data Service. Available options are Data Over Voice Channel ,
64K, 56K, and Auto. Recommended selection is Auto.
Step 5: Enter Remote Sub Address Number if necessary.
Step 6: Select STAC compression option.
Step 7: Set Idle Timeout number. The range is from 0 to 3600 seconds.
Step 8: Select Advice of Charge Support option and enter the Unit Price
and Currency in the corresponding blanks if th e selection is Yes.
Step 9: Click OK to return to the main configuration screen and skip to next
step. Otherwise click Alternative Number if there is one or more alternative
remote phone numbers. Enter the alternative remote phone number in the
corresponding blanks. Then press OK to return to the previous screen. Again
press OK to return to the main configuration screen.
Step 10: Click Apply and Test
28