SMC Networks BARRICADE SMC7301TA User Manual page 24

Step 6: If you choose via PPTP for the selection of Obtain IP Address
Automatically. The following screen will be displayed. Enter the following
information and then click Apply and Test.
Profile Name: The name that you will use to identify this Internet accesses
profile.
Obtain IP Addresses Automatically: Obtain the IP address from ISP using
PPTP connection to the local cable modem or ADSL modem. Some
DSL-based ISPs use cable modem/ADSL m odem as PPTP server to
establish communications with an end -user. Check with your ISP to see if
PPTP is used.
PPTP Local IP Address: IP address of SMC7301TA router for the PPTP
connection. Consult your ISP for this information.
PPTP IP Netmask: IP network mask for the PPTP Tunnel. Consult your ISP
for this information.
PPTP Remote IP Address: IP address of the broadband modem for the
PPTP Tunnel. Consult your ISP for this information.
ISP Account Name: the username of your ISP account
ISP Account Passw ord: the password of your ISP account
Idle Timeout (0-3600 seconds): The default value of the idle timeout is 120
seconds. It represents the number of seconds of inactivity over the connection:
when this value is reached, the SMC7301TA will disconnect the connection.
You can change the idle timeout value to anything between 0 to 3600 seconds.
But if you select 0, the connection will never be timed out.
24