SMC Networks BARRICADE SMC7301TA User Manual page 23

Isdn router

Hide thumbs Also See for BARRICADE SMC7301TA:

Table of Contents

system.

Step 5: If you choose via PPP over Ethernet for the selection of Obtain IP

Address Automatically. The following screen will be displayed. Enter the

following information and then Click Apply and Test.

Profile Name: the name that you will use to identify this Internet access

profile.

Obtain IP Addresses Automatically: get the IP Address via PPP over

Ethernet. Some DSL-based ISPs use PPPoE to establis h communications

with an end-user. If you are connected to the Internet through a DSL line,

check with your ISP to see if they use PPPoE

ISP Account Name: the username of your ISP account

ISP Account Password: the password of your ISP account

(Optional) Service Name: Enter the Service Name provided by your ISP if it

is required.

(Optional) Access Concentrator Name: Enter the Access Concentrator

Name provided by your ISP if it is required.

Idle Timeout (0-3600 seconds): The default value of the idle timeout is 120

seconds. It represents the number of seconds of inactivity over the connection:

when this value is reached, the SMC7301TA will disconnect the connection.

You can change the idle timeout value to anything between 0 to 3600 seconds.

But if you select 0, the connection will never be timed out.

Table of Contents