Advertisement
Quick Links
888.373.6057
Top Piece
Side Panel
Before you Begin
•
Recomeneded 2-person assembly
•
Read all instructions before assembly
•
Inspect all parts for damage and missing parts before assembly
•
Please verify you have the correct parts and quantity of hardware before proceeding
•
Open package in a clean, flat area
•
Carefully remove all components from the box and remove banding or protective wrapping
•
If parts are missing or broken, please contact our customer service department at 1(888) 373-6057
•
The hardware quantities listed above are required for proper assembly Some extra hardware may
also have been included
Objects measuring over 36 inches in height, whether they stand alone or are stacked, must be
!
securely attached to the wall to prevent potential shifting or tipping. It is also recommended to
use screws or finish nails to join stacked units together.
Package Contents
Wood Screw 1" - Actual size (42X)
wineracksamerica.com
Herringbone Bin - 4 Column
Wood Screw 2" - Actual size (18X)
Side Panel
Bottom Piece
Part #: INFOGCSBH4
|
Assembly Guide
Shelves
REQUIRED
Screwdriver
SUGGESTED
Cordless Drill
7/64" Drill Bit
Recommended for drilling
pilot holes for all screws
to avoid splitting wood
Page 1
Advertisement
Related Manuals for Wine racks America GRANDCELLAR INFOGCSBH4
Summary of Contents for Wine racks America GRANDCELLAR INFOGCSBH4
- Page 1 888.373.6057 wineracksamerica.com Part #: INFOGCSBH4 Herringbone Bin - 4 Column Assembly Guide Top Piece Side Panel Shelves Side Panel Bottom Piece REQUIRED Before you Begin • Recomeneded 2-person assembly • Read all instructions before assembly • Inspect all parts for damage and missing parts before assembly •...
- Page 2 888.373.6057 wineracksamerica.com Part #: INFOGCSBH4 Herringbone Bin - 4 Column Assembly Guide Package Contents Continued Bottom Panel (1X) Top Panel (1X) Width: 18.44in Width: 18.44in Side Panels (2X) Width: 35.25in Shelf (1X) Shelf (1X) Shelf (2X) Width: 6.31in Width: 14in Width: 19.75in Shelf (2X) Shelf (1X)
- Page 3 888.373.6057 wineracksamerica.com Part #: INFOGCSBH4 Herringbone Bin - 4 Column Assembly Guide Using a screwdriver or drill, fasten the bottom piece (B) to the left and right-side panels (C) with the 1” screws. Ensure the channels are facing inward. Attach the top piece (A) to the left and right panels (C).
- Page 4 888.373.6057 wineracksamerica.com Part #: INFOGCSBH4 Herringbone Bin - 4 Column Assembly Guide Attach the shelf dividers to their corresponding parts as shown below. Insert the flat side of each shelf into the premanufactured channel and secure it to the adjoining part using 2" screws. Insert the flat side of shelf part (D) Attach shelves (E) and (G) to shelf (F) with the flat side into the premanufactured channel...
- Page 5 888.373.6057 wineracksamerica.com Part #: INFOGCSBH4 Herringbone Bin - 4 Column Assembly Guide Slide shelves into the previously built frame aligning each shelf with the premanufactured channels of the frame. Insert shelf part (I) into the unit and secure from the side and bottom using 1” screws. Secure each shelf to the frame from the outside at each joint on all 4 sides of the unit using 1”...
-
Page 6: Care Instructions
888.373.6057 wineracksamerica.com Part #: INFOGCSBH4 Herringbone Bin - 4 Column Assembly Guide Care Instructions For More: • Do not use chemical cleaners or abrasive cleaning materials, as they may damage the surface. • Do not place hot items on surfaces. •... - Page 7 888.373.6057 wineracksamerica.com Cellar Installation Guide Cellar Installation Guide After assembling all the modules, begin stacking them in place, starting from the bottom layer and working your way up. For cellar installations using the base platform and end panels, before stacking the units, ensure that the units placed directly on the base platform are recessed by 11/16"...
Need help?
Do you have a question about the GRANDCELLAR INFOGCSBH4 and is the answer not in the manual?
Questions and answers