Advertisement
Table Top Racks
Assembly GUIDE
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
LEFT
END LADDER
* All models follow the same assembly procedure varying only in the number of middle ladders your rack will require.
Package Contents
RIGHT
MIDDLE
END LADDER
LADDER
KITCHEN MODEL
MIDDLE LADDERS
24 BOTTLE RACK
[3x]
36 BOTTLE RACK
[5x]
48 BOTTLE RACK
[3x]
64 BOTTLE RACK
[7x]
STANDARD CONNECTOR (X4)
SOLID TOP (X1)
SCREW COVERS
WOOD SCREWS
Questions?
888.373.6057
or visit
wineracksamerica.com
Page 1
SCAN FOR
ASSEMBLY VIDEO
tools for assembly
Required
Screwdriver
Wood Glue
Suggested
Cordless Drill
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wine racks America Table Top Racks
Summary of Contents for Wine racks America Table Top Racks
- Page 1 Table Top Racks Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 1 SCAN FOR ASSEMBLY VIDEO Package Contents tools for assembly *Please verify that you have the correct number of parts before proceeding. Required Depending on the model you purchased, your bundle should contain the following:...
- Page 2 Table Top Racks Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 2 1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding with a utility knife. Check the parts list to verify package contents.
- Page 3 Table Top Racks Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 3 *NOTE: If you purchased a 48 Bottle Kitchen Rack, your unit will come with 1 extra standard connector. Attach connector to the back of the rack with a cordless drill or screwdriver.
- Page 4 Table Top Racks Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 4 5. Stand the rack up and insert the solid top into place on top of the rack. The bottom side of the solid top will have wooden cleats in place to ensure proper alignment of the top. (figure 4) Secure the solid top by adding wood glue to the tops of each vertical riser.
Need help?
Do you have a question about the Table Top Racks and is the answer not in the manual?
Questions and answers