Advertisement
4 Column Display Row Corner
Assembly GUIDE
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
1 COLUMN SCREWLESS
CONNECTOR (x12)
CORNER WEDGE (x6)
Package Contents
END LADDER ASSEMBLIES (x8)
77 1/8"
1 COLUMN STANDARD
CONNECTOR (x24)
DISPLAY TRAYS (x4)
Page 1
IMPORTANT!
If you purchased a 2 Column Display Row
Corner Kit, your package will contain the
following parts:
END LADDER ASSEMBLIES - x4
1 COLUMN SCREWLESS CONNECTORS - x6
1 COLUMN STANDARD CONNECTORS - x12
CORNER WEDGE - x6
DISPLAY TRAYS - x2
FINISH NAILS
WOOD SCREWS
WOOD PUTTY
Questions?
888.373.6057
or visit
wineracksamerica.com
tools for assembly
Required
Screwdriver
Wood Glue
Suggested
Cordless Drill
Finish Nailer
+
Nail Setter
Hammer
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wine racks America 4 Column Display RowCorner Kit
Summary of Contents for Wine racks America 4 Column Display RowCorner Kit
- Page 1 4 Column Display Row Corner Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 1 IMPORTANT! If you purchased a 2 Column Display Row Corner Kit, your package will contain the following parts: END LADDER ASSEMBLIES - x4 1 COLUMN SCREWLESS CONNECTORS - x6 1 COLUMN STANDARD CONNECTORS - x12 CORNER WEDGE - x6 DISPLAY TRAYS - x2...
- Page 2 4 Column Display Row Corner Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 2 1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding with a utility knife. Check the parts list to verify package contents. Arrange two end ladders on the floor so that the bottle support pieces face one another.
- Page 3 4 Column Display Row Corner Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 3 4. Flip rack over and secure a standard column connector to the top and bottom of your rack using the screws provided. (figure 3) FRONT OF RACK 5.
- Page 4 4 Column Display Row Corner Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 4 ATTACH SCREWLESS CONNECTORS 37 1/4" 51 3/4" 26 5/8" Front of rack 6. Fill the nail holes using the wood putty provided. Simply push the putty into each hole using your thumb and wipe excess putty off the surface using a damp cloth.
- Page 5 4 Column Display Row Corner Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 5 8. Repeat steps 1-7 until you have a total of 4 fully assembled 1 Column Display Cellar racks. If you purchased a 2 Column Display Row Corner kit, you will only assembly two - 1 Column Display Cellar racks. 9.
Need help?
Do you have a question about the 4 Column Display RowCorner Kit and is the answer not in the manual?
Questions and answers