Advertisement
Quick Links
Installing your Cylindrical Lock
Thank you for purchasing a Centrios
Centrios is designed to help businesses like yours simplify how they manage who can access what
and when.
Before you get started, please download the Centrios app from the Google Play store or
Apple App store. Downloading the Centrios app first will ensure your mobile phone is
compatible with the app and allow you to create your account, so you are ready to enroll
your Centrios product.
If you have any questions, don't hesitate to contact us at support@centrios.com or view our support
resources at centrios.com.
Let's do this.
What's in the box
Before you get started, take a minute to make sure you've got everything shown on this page.
Exterior
Interior
Escutcheon
Escutcheon
Retractor
Installation
Tool
*Lever styles may vary
What else will you need?
In addition to your lock, you're going to need a #2 Phillips head screwdriver. Optionally you may need
a #1 Phillips head screwdriver, drill, chisel, hammer, and a pencil (you may also need a slot head
screwdriver too).
IMPORTANT
Retrofitting or modifying this product may impact its fire rating, safety features and warranty. Make
sure you consult with code specifications to ensure you're complying with all codes and ratings.
cylindrical lock, part of the Centrios
™
AA Alkaline
Template
Batteries
Center Line Door Sensor Magnet
(Mounted on Frame)
LOW EDGE
BEVELED EDGE
Cylindrical Lock
Vertical
DOOR ONLY
Center Line
80-9000-0011
HIGH EDGE
Rev A
Centrios
TM
Cylindrical Locks
HIGH EDGE Fold Line
CEB100
Cylinder Override
2-3/4" Beveled Backset
CEB102
No Cylinder Override
4-1/8"
(105mm)
HIGH EDGE Fold Line
2-3/4" (70mm)
2-3/8" Beveled Backset
Between Centers
5/16" Dia
(8mm)
Thru Door
CUT
Horizontal
CUT
CUT
Center Line
Cylinder
2-1/8" Dia
(54mm)
Thru Door
CUT
5/16" Dia
(8mm)
Thru Door
LOW EDGE Fold Line
2-3/8" Beveled Backset
LOW EDGE Fold Line
2-3/4" Beveled Backset
3"
CAUTION:
If printed from website
Print 1:1 Scale
Measure both 3" lines to check scale
3"
For latch and strike preps refer to template 9000-0001
Product Support Tel 754-332-7496 • www.centrios.com
Copyright © 2022. All rights reserved.
An ASSA ABLOY Group brand
Reproduction in whole or in part without the express written permission of Yale Security Inc., an ASSA ABLOY Group company is prohibited.
Levers*
Scan the QR code and
follow along with our
installation video
smart lock system.
™
Interior
Mounting Plate
Door Sensor
Keys
Magnet Kit
Latch
Strike
Screws
Lever
Removal
Tool
Cylinder
Retainer
Advertisement
Related Manuals for Assa Abloy Centrios CEB100 Series
Summary of Contents for Assa Abloy Centrios CEB100 Series
- Page 1 Product Support Tel 754-332-7496 • www.centrios.com Copyright © 2022. All rights reserved. An ASSA ABLOY Group brand Reproduction in whole or in part without the express written permission of Yale Security Inc., an ASSA ABLOY Group company is prohibited. Levers* Retractor...
- Page 2 Prepare your door, if necessary Here, you’ll get your door ready for its new lock, if necessary. You may have to drill holes and chisel out a space on the edge of the door for the latch plate. Drill holes 1/2 way thru door then For this step, use the template included in the box complete from other...
- Page 3 Install the latch IMPORTANT: Don’t forget, the slanted bevel of the latch must face the direction your door closes (see the overhead view). For this you’ll need the latch and two of the #8-32 x 3/4" undercut flat head combo screws. #8-32 x 3/4"...
- Page 4 Set up the exterior escutcheon IMPORTANT: DO NOT remove the QR Remove cardboard code label on the exterior escutcheon tools. until the lock is completely installed, set Save blue tool for up, and functioning. later step. We’re now going to make sure your escutcheon is set up correctly.
- Page 5 Install the cylinder into the lever (if necessary) If you need to install the cylinder into the lever, first make sure the cylinder tailpiece is Lever aligned in the same direction as the cylinder Cylinder bible (picture). Cylinder Then, slide the cylinder all the way into the Tailpiece lever.
- Page 6 Install the retractor on the exterior escutcheon It’s time to install the retractor onto the back of the escutcheon. One side of the retractor has a curved opening. The curved opening should face the latch (away from the hinges). Slide retractor onto flat posts Slide the retractor onto the flat posts on the escutcheon and...
- Page 7 Install the interior mounting plate Now we can move to the interior of the door. First, feed connector of the harness through the rectangle hole in the mounting plate. Next, rotate the cardboard tool 90° so that the printed arrow points towards the latch edge of the door.
- Page 8 Install the interior escutcheon We can now get the interior escutcheon in place. If the battery cover is snapped into place, slide the battery cover up using the blue installation Tape tool (saved from step 4). around wire loop This will allow you to feed the harness and connector through the hole at the top (back side) of the interior escutcheon.
- Page 9 Install the batteries, battery cover, and interior lever We can now finish up with the escutcheon. Insert the four AA batteries into the battery compartment and slide the cover down until it clicks into place. When you slide the cover on, make sure you aren’t pinching the wiring harness. Slide the lever onto the protruding shank.
- Page 10 Install the door sensor magnet Just a couple more things and we’re all finished. We now need to install the door sensor magnet. You can either have this surface mounted or flush mount it into the door frame. The pictures below show where to install the door sensor magnet if you have a door that swings in (inswing) or swings out (outswing).
- Page 11 If you are flush mounting... Start by marking off a horizontal line on Horizontal your door frame using the guide arrow on Line the escutcheon. Remove the magnet core from the surface mount assembly. Then, remove the liner from the flush Guide Arrow mount cover.
- Page 12 If you are surface mounting... Start by marking off a horizontal line on your door frame using the guide arrow on the escutcheon. Now apply double-sided adhesive to the surface mount magnet assembly. Then stick this to the frame centering it on the horizontal line you just marked on your door frame. Secure the magnet with two screws using a #1 Phillips driver, and then re-install the plastic cover over the magnet assembly.
- Page 13 Programming the lock Now that you have the lock hardware installed, it is time to set up the lock programming. If you haven’t done so, first download the Centrios app to your mobile device from the Google Play Store or the Apple App Store. The Centrios app will guide you through creating an account and adding devices to the system.
- Page 14 Maintenance Changing the batteries: It is recommended that the batteries be changed once per year. When changing the batteries it is recommended a name-brand alkaline battery be used. The product was not certified for use with rechargeable batteries. Remove the battery cover using the blue installation tool, or other small pin-like device (paper clip) to unlatch the battery cover.
- Page 15 Warnings Changes or modifications to this device not expressly approved by ASSA ABLOY could void the user’s authority to operate the equipment. FCC: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 16 Centrios is a business associated with ASSA ABLOY Access and Egress Hardware Group, Inc., an ASSA ABLOY Group company. Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Need help?
Do you have a question about the Centrios CEB100 Series and is the answer not in the manual?
Questions and answers