Configuration
DHCP
gateway
selection
Lease Time
User Mode
Ethernet Mode Setting
The [Ethernet Mode configuration] page allows the user to set
the LAN port to Auto Sense, 100 Mbps Full Duplex, 100 Mbps Half
Duplex, 10 Mbps Full Duplex or 10 Mbps Half Duplex.
PPP Configuration
The [PPP Configuration] page allows the user to configure multiple
PPP sessions for each PVC. It can support up to total of 16 PPP
sessions, and each PVC can support up to 8 PPP sessions. The
multiple PPP sessions may be configured with any combination
over 8 PVCs.
To configure the PPP, must go to the [PPP Account Configuration]
page first to configure [Account ID], [Users Name] and [Password].
30
The default setting for the DHCP Gateway Selection is
[Automatic]. The user can select [User Defined] to specify
[User Defined Gateway Address]. The DHCP server will
issue the User Defined Gateway Address
to the LAN DHCP clients.
The Lease time is the amount of time a network user will
be allowed to connect with DHCP server. If all fields are
0, the allocated IP addresses will be effective forever.
Under the [Single-User] mode, the DHCP server only
allocates one IP address to local PC. Under the
[Multiple-User] mode, the DHCP server allocates the
IP addresses specified by the DHCP address pool.