Table of Contents
Advertisement
Showtime
Firmware
Version:
Line State:
Modulation:
Annex Mode:
Startup Attempts: This field displays the ADSL connection attempts
Max Tx Power:
CO Vendor:
Elapsed Time:
SNR Margin
Line Attenuation Attenuation is the decrease in magnitude of the ADSL
Errored Seconds The error during Showtime, whenever, a given sec
This field displays the ADSL data pump firmware
version number.
This field displays the ADSL connection process
and status.
This field displays the ADSL modulation status
for G.dmt or T1.413.
This field displays the ADSL annex modes for
[Annex A] or [Annex B].
after loss of showtime.
This field displays the transmit output power level
of the CPE.
This field displays the Central Office DSLAM vendor
name, if available.
This field displays the time of the modem has been
in operation.
Amount of increased noise that can be tolerated while
maintaining the designed BER (bit error rate). The
SNR Margin is set by Central Office DSLAM. If the
SNR Margin is increased, bit error rate performance
will improve, but the data rate will decrease.
Conversely, if the SNR Margin is decreased, bit error
rate performance will decrease, but the data rate will
increase.
line signal between the transmitter (Central Office
DSLAM) and the receiver (Client ADSL Modem),
measured in [dB]. It is measured by calculating
the difference in dB between the signal power
level received at the Client ADSL modem and
the reference signal power level transmitted from
the Central Office DSLAM.
contains CRC error, that second will be declared
error second.
Entering the Admin Page
19
Advertisement
Table of Contents
