Table of Contents
Advertisement
Configuration
RIP
Supply
Interval
Expire
Timeout
Garbage
Timeout
RIP Per Interface Configuration
The [RIP Per Interface Configuration] page allows the user to set
the configuration for each Interface (PVCs, PPP Sessions and
LAN).
Interface
Enable
44
This field allows the user to enable or disable the RIP
session. The resulting RIP session will monitor all network
interfaces that are currently available for messages from
other RIP routers.
This field allows the user to enter the Supplier Interval
timer in seconds. This timer specifies how often RIP
sends announcements as a RIP Supplier.
(Default: 30 seconds)
This field allows the user to enter the Expire timer in
seconds. This timer specifies the expiration time of a route.
When a route has not been updated for more than expire
period of time, it is removed from the Route Table. This
route is invalidated and remains in the internal RIP Route
Table. It will be included in the RIP announcements to let
other routers know the changes.
(Default: 180 seconds)
This field allows the user to enter the Garbage timer in
seconds. This timer specifies how long the expired and
invalidated routes are kept in the Internal RIP Route Table
before it is removed from it.
(Default: 300 seconds)
This field allows the user to choose the Interface (PVCs,
PPP Sessions and LAN), for the RIP to be configured.
This field allows the user to [Enable] (Yes) or [Disable] (No)
the specified interface for RIP.
Advertisement
Table of Contents
