Table 4-55 Private Vlan Commands - SMC Networks 6726AL2 Management Manual

This section describes commands used to configure private VLANs.
Command
Edit Private VLAN Groups
private-vlan
private-vlan association Associates a community VLAN with a
Configure Private VLAN Interfaces
switchport mode
private-vlan
switchport private-vlan
host-association
switchport private-vlan
isolated
switchport private-vlan
mapping
Display Private VLAN Information
show vlan private-vlan Shows private VLAN information
To configure primary/secondary associated groups, follow these steps:
1. Use the private-vlan command to designate one or more community
VLANs and the primary VLAN that will channel traffic outside of the
community groups.
2. Use the private-vlan association command to map the community
VLAN(s) to the primary VLAN.
3. Use the switchport mode private-vlan command to configure ports
as promiscuous (i.e., having access to all ports in the primary VLAN)
or host (i.e., community port).
4. Use the switchport private-vlan host-association command to
assign a port to a secondary VLAN.

Table 4-55 Private VLAN Commands

Function
Adds or deletes primary, community, or
isolated VLANs
primary VLAN
Sets an interface to host mode or
promiscuous mode
Associates an interface with a secondary
VLAN
Associates an interface with an isolated
VLAN
Maps an interface to a primary VLAN
VLAN C
OMMANDS
Mode Page
VC 4-210
VC 4-212
IC 4-213
IC 4-214
IC 4-214
IC 4-215
NE, 4-216
PE
4-209