SMC Networks 6726AL2 Management Manual page 243

2. At the prompt, enter the user name and system password. The CLI will
display the "Vty-n#" prompt for the administrator to show that you are
using privileged access mode (i.e., Privileged Exec), or "Vty-n>" for the
guest to show that you are using normal access mode (i.e., Normal
Exec), where n indicates the number of the current Telnet session.
3. Enter the necessary commands to complete your desired tasks.
4. When finished, exit the session with the "quit" or "exit" command.
After entering the Telnet command, the login screen displays:
Username: admin
Password:
CLI session with the SMC6726AL2 is opened.
To end the CLI session, enter [Exit].
Vty-0#
Note: You can open up to four sessions to the device via Telnet.
U C
SING THE OMMAND
L I
INE NTERFACE
4-3