Figure 3-39 Binding A Port To An Acl - SMC Networks 6726AL2 Management Manual

C
ONFIGURING THE
Web – Click Security, ACL, Port Binding. Mark the Enabled field for the
port you want to bind to an ACL, select the required ACL from the
drop-down list, then click Apply.
CLI – This example assigns an IP and MAC access list to port 1, and an IP
access list to port 3.
Console(config)#interface ethernet 1/1
Console(config-if)#ip access-group david in
Console(config-if)#mac access-group jerry in
Console(config-if)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#ip access-group david in
Console(config-if)#
3-86
S
WITCH

Figure 3-39 Binding a Port to an ACL

4-144
4-125
4-132