Hostname; User Access Commands; Table 4-9 User Access Commands - SMC Networks 6726AL2 Management Manual

C L
OMMAND INE

hostname

This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1
Console(config)#

User Access Commands

The basic commands required for management access are listed in this
section. This switch also includes other options for password checking via
the console or a Telnet connection (page 4-14), user authentication via a
remote authentication server (page 4-94), and host access authentication
for specific ports (page 4-107).
Command
username
enable password Sets a password to control access to the
4-34
I
NTERFACE

Table 4-9 User Access Commands

Function
Establishes a user name-based authentication
system at login
Privileged Exec level
Mode Page
GC 4-35
GC 4-36