Table of Contents
Advertisement
H
ARDWARE
1. Select the Site – Choose a location for your SMC2655W Wireless
Access Point. Usually, the best location is at the center of your wireless
coverage area, if possible within line-of-sight of all wireless devices.
2. Place the Access Point in a position that gives it maximum coverage.
Normally, the higher you place the antenna, the better the
performance.
3. Position the antennas in the desired positions. For more effective
coverage, position one antenna along the vertical axis and the other
antenna along the horizontal axis (the antennas emit signals along the
toroidal plane - and thus provide more effective coverage when
positioned along alternate axis).
4. Connect the Ethernet cable – The SMC2655W can be wired to an
Ethernet network through an Ethernet device such as a hub or a
switch using category 3, 4, or 5 UTP Ethernet cable and an RJ-45
connector.
5. Connect the power cable – Connect the power adapter cable to the
9 VDC power socket on the rear panel.
Warning: Use only the power adapter supplied with the SMC2655W.
6
I
NSTALLATION
Advertisement
Table of Contents
