ecobee EBERS42 Manual

How to install your SmartSensor

1. Activate your SmartSensor.
   Use the ecobee app to add the SmartSensor. Scan the QR code then pull the tab. Continue the setup on the ecobee app.
   

2. 1. Place it with a stand.
      Use the stand to place your sensor on a table or shelf. If you've picked a spot that's higher than 5 feet, use the wall-mount.
      
   2. Stick it with the wall-mount.
      Or stick your Sensor to the wall if you've got curious children or pets. Clean the desired area with a wet cloth. Once dry, position and press the adhesive for 10 seconds.
      
3. Explore the features you've unlocked on your ecobee.

   	SMART HOME/AWAY Sensors adjust temperature for comfort if you're home, and savings if you're not.
   	FOLLOW ME Sensors keep track of what room you're in to focus comfort where it matters most.
   	THERMAL PROTECT Get abnormal temperature alerts.

   Find out more at ecobee.com/smartsensor

Smart Sensor Specifications

Model No: EBERS42
FCC ID: WR91881541520
IC: 7981A-1881541520
Power source: CR2477 battery
Operating Temperature: 0˚C to 40˚C
Operating Humidity: 20% to 80% RH