NexiGo 1551C Manual

Introduction

Register to get EXTRA ONE-year warranty. Only valid in registering within 14 days of product delivery. nexigo.com/warranty.

If you have any problems, please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our industry leading 1-year manufacturer's warranty. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date to extend your warranty coverage to TWO Years!

Contact Information

Website: www.nexigo.com

Manufacturer: Nexight INC Email: cs@nexigo.com

Tel: +1(458) 215-6088

Address 11075 SW 11th st, Beaverton, OR 97005, US

Product Introduction

The NexiGo Horizontal Stand is designed to allow you to place your P-5 console in a horizontal position without damaging the side panels of the unit.
NOTE: It is not recommended to place other objects on top of the console while it is in a horizontal position.

The NexiGo Cooling Fan for the P 5 consoles, designed to reduce the operating temperature Of the console, improving performance and prolonging the console's lifespan. It will automatically turn on/off with P-5 console. Powered by a USB port on the console, it does not require additional adapters or cables to supply power. Additionally, there is a USB pass-through port on the fan, so you don't even have to give up a USB port for the device to function. While operating, the fan will display a blue LED light letting you know the unit is working. Compatible with both the Disc and Digital editions of the P-5 console.

Product Overview

How to Attach the Horizontal Stand to the P-5 Console

P-5 Digital Edition

1. Ensure the support stand is firmly inserted into the left stand.
2. Attach the left stand and right stand to the ends Of the bottom plate (the one without the P-5 logo) as shown in the following picture.
   

3. When complete it should look like the image below.
   

P-5 Disc Edition

1. Please remove the support stand from the left stand as shown below.
   

2. Attach the left stand and right stand to the ends Of the bottom plate (the side with the disc drive) as shown in the following picture.
   

3. When complete it should look like the image below.
   

How to Attach the Cooling Fan to the P-5 Console

1. Slide the hooks at the top of the fan into the uppermost slots in the back grill of the P-5 console.
2. Insert the USB fan power connector into the upper USB port (it will be positioned right over the correct port) at the back of the P-5 console
3. The fan is now ready to use.

Notes

• Do not block or impede airflow to this cooling fan.
• Ensure the console has a reasonable amount of clearance on all sides, so airflow is not obstructed. Do not stick fingers or other objects into any of the openings on this cooling fan. You may damage the unit or injure yourself.
• Please use a clean dry cloth to clean the products. Do not clean the products with water, alcohol, or other cleaning agents. When cleaning the cooing fan, please unplug it first.
• The products can not be used and/or stored in high humidity conditions.
• If the products are damaged, please exercise the warranty or dispose of the items. Do not attempt to open and repair them independently.
• To ensure the longevity and lifespan of the stand, protect it from dust and do not stack heavy objects on it.