NexiGo 0582 Manual
![]()
Product Introduction
The NexiGo P-5 Console Panels for Disc Editions are perfect for anyone who wants to add a little style and personalization to their P 5 disc edition console. Made from highly durable materials, the NexiGo P-5 Console Panels allow you to keep your console looking as good as new for the life of the unit.
Product Overview
![Nexigo - 0582 - Product Overview Product Overview]()
NOTE: Take care while removing the console panels as they can be broken if an excessive amount of force is applied
Product Instructions
Step One - Remove the Included Panels
- Lay the console flat with the left panel up as shown in the image below.
Note: The P-5 logo should be in the top left corner in this orientation as indicated.
![Nexigo - 0582 - Instructions - Remove the Included Panels - Step 1 Instructions - Remove the Included Panels - Step 1]()
- Use one hand to hold the bottom of the P-5 console steady and use your other hand to grab the corner of the left panel where the P-5 logo is located.
![Nexigo - 0582 - Instructions - Remove the Included Panels - Step 2 Instructions - Remove the Included Panels - Step 2]()
- Lift the corner upward, toward you. Once you feel it lift, you can remove the left panel by sliding it toward the bottom of the system.
![Nexigo - 0582 - Instructions - Remove the Included Panels - Step 3 Instructions - Remove the Included Panels - Step 3]()
- Flip the system over so that the top Of the system is still oriented in the same direction as you had it in the previous steps. Repeat the above process for the other panel to remove it.
Step Two - Put On The NexiGo P-5 Console Panels
- Align the panel with the system, please make sure that the hooks on the panel line up with the openings on the body of the system.
![Nexigo - 0582 - Instructions - Put On The Console Panels - Step 1 Instructions - Put On The Console Panels - Step 1]()
- When everything is aligned, push the panel up toward the top of the system. You'll hear and feel the panel snap into place.
![Nexigo - 0582 - Instructions - Put On The Console Panels - Step 2 Instructions - Put On The Console Panels - Step 2]()
- Carefully turn the console over so that the top of the system is still facing the same direction as you had it in the previous steps and then repeat the above process to install the panel on the other side.
Notes
- To ensure longevity and lifespan of the item, protect it from dust and do not stack heavy objects on it.
- Please use a lint-free dry cloth to clean the product Do not clean the product with water or alcohol
- If the unit does not work as advertised but does not show signs of damage, please exercise the warranty or dispose of the item.
- Keep this product dry.
Tel: +1(458) 215-6088
Website. www.nexigo.com
If you have any problems please contact us at cs@nexigo.com at any time for further assistance.
This product is covered by our industry leading one-year manufacturers warranty. Please visit www.nexigo.com/warranty-information for warranty terms and conditions. Make sure to register your purchase at www.nexigo.com/warranty for a FREE additional 1-year warranty!
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download NexiGo 0582 Manual
Need help?
Do you have a question about the 0582 and is the answer not in the manual?
Questions and answers