Vestil SST-45 Manual

Self-leveling scissor table

Advertisement

Quick Links

TABLE OF CONTENTS

Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Specifications...........................................................................................................................
Words............................................................................................................................
Instructions....................................................................................................................
Table...............................................................................................................
Table........................................................................................................................
Warranty......................................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
SST-45 SELF-LEVELING SCISSOR TABLE
Table of Contents
Condition...............................................................................................
Table...........................................................................................
Copyright 2025 Vestil Manufacturing Co.
Rev. 1/28/2025
Vestil Manufacturing Company
Fax: (260) 665-1339
Web:
www.vestil.com
Table).............................................................
SST-45, MANUAL
e-mail:
info@vestil.com
https://www.vestil.com/page-
Page 1 of 10
Page
2
2
3
3
4
-
5
6
6
6
-
7
7
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SST-45 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil SST-45

  • Page 1: Table Of Contents

    For answers to questions not addressed in these instructions and to order replacement parts, labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be contacted online at https://www.vestil.com/page-parts-request.php. Electronic copies of Instruction Manuals Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-...
  • Page 2: Specifications

    TABLE OF CONTENTS Rev. 1/28/2025 SST-45, MANUAL SPECIFICATIONS Dimensions and other product specifications appear in the diagrams and table below. Additionally, documents that provide specifications for SST-series lift tables can be downloaded from Vestil’s website. Specifications include dimensions, weight, capacity information.
  • Page 3: Signal Words

    SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products, but no manual can address every conceivable risk. Minimize the likelihood of injury by being mindful of the hazards identified below and by inspecting and maintaining the product as instructed in INSPECTING &...
  • Page 4: Assembling The Table

    The clevis pin prevents the scissor legs from moving. After installing the pin, slowly lower the table until the roller firmly rests against the clevis pin. Lift latches while raising tabletop Roller rests against clevis Clevis Linchpin Clevis Roller Roller Table of Contents Copyright 2025 Vestil Manufacturing Co. Page 4 of 10...
  • Page 5 4. Look underneath tabletop to confirm that the spring is properly seated as shown in the photograph to the right. Table of Contents Copyright 2025 Vestil Manufacturing Co. Page 5 of 10...
  • Page 6: Using The Table

    Casters (if table quipped with option SST-45-CK-GFN): Examine each caster. Caster wheels should not be unevenly worn (out of round), wobbly, or cracked. Wheels should rotate smoothly. Axles/axle bolts should be straight and undamaged.
  • Page 7: Replacement Parts

    Step 1: Tag the unit, “Out of Service.” Step 2: Inspect the lifter as described above. If significant damage, corrosion, rusting, or wear is found, DO NOT use the table. Contact Vestil’s TECHNICAL SERVICE DEPARTMENT to discuss your findings. Step 3: Remove dirt and other debris from all surfaces with a mild soap and water solution.
  • Page 8 TECHNICAL SERVICE & PARTS DEPARTMENT online at https://www.vestil.com/page-parts- request.php. Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the PARTS DEPARTMENT. Table of Contents Copyright 2025 Vestil Manufacturing Co. Page 8 of 10...
  • Page 9 TABLE OF CONTENTS Rev. 1/28/2025 SST-45, MANUAL SST-45-CK-GFN CASTER KIT (SOLD SEPARATELY) An optional caster kit is available for SST-45 series spring tables. The kit includes the following subassemblies, parts, and fasteners: Bolt holes in Attach floor lock Fork fork pocket...
  • Page 10: Limited Warranty

    After Vestil receives your request for warranty service, an authorized representative will contact you to determine whether your claim is covered by the warranty. Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN.

Table of Contents