Download Print this page

Vestil EPC Series Use And Maintenance Manual

Vertical plate clamps
Hide thumbs Also See for EPC Series:

Advertisement

Quick Links

EPC-S
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging;
then inspect the product closely to determine whether it sustained damage during transport. If damage is
discovered during the inspection, immediately record a complete description of the damage on the bill of
lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the
product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or
b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential
damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or
maintaining this product.

Table of Contents

Product Specifications.............................................................................................................. 2
Hazard Identification: Explanation of Signal Words......................................................................... 2
Safety Recommendations.......................................................................................................... 2 - 3
FIG. 1: EPC-series plate clamps exploded parts diagram & bill of materials.......................................... 4
Use instructions...................................................................................................................... 5 - 8
Inspections & Maintenance........................................................................................................ 9
Label Placement Diagram.......................................................................................................... 10
Limited Warranty...................................................................................................................... 11
Rev. 9/10/2014
V
ESTIL
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
V
ERIES
ERTICAL
U
M
SE AND
AINTENANCE
Copyright 2014 Vestil Manufacturing Co.
Page 1 of 12
M
ANUFACTURING
Fax: (260) 665-1339
e-mail:
sales@vestil.com
P
C
LATE
LAMPS
M
ANUAL
EPC, manual.doc
C
.
ORP

Advertisement

loading
Need help?

Need help?

Do you have a question about the EPC Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil EPC Series

  • Page 1: Table Of Contents

    1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used is exclusively the responsibility of the owner/end-user. 2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) Information provided on labels affixed to the product.
  • Page 2: Product Specifications

    Product specifications Vestil offers 3 models of locking plate clamp: EPC-20; EPC-40; and the EPC-60. Each clamp is made from steel and is powder coated to prevent rusting. All models incorporate a heavy duty formed shackle for easy use with overhead hoists.
  • Page 3  DO NOT remove or obscure any label. Verify the placement and legibility of all labels as shown in the “Label placement diagram” on p. 10. If a label is damaged or unreadable, immediately contact Vestil for a replacement. DO NOT use the clamp UNLESS all labels are securely attached and readable.
  • Page 4 Lock Nut Connecting Head Wheel Assembly Shackle Connecting Link Split Pin Latch Lever Spring Pin Axis Pin Spring Move Pin Spring Pin Gripper Connecting Link Pin Gripper Pin Handle Washer Cam Bolt Copyright 2014 Vestil Manufacturing Co. Page 4 of 12...
  • Page 5: Use Instructions

    A swinging load may cause serious personal injuries Proper Improper Vertical Horizontal Lift Lift The gripper (8) must contact the cam (2). If they do not, adjust the position of the gripper until contact is made. Copyright 2014 Vestil Manufacturing Co. Page 5 of 12...
  • Page 6 7. If you must use two clamps to balance the load, grasp plate clamp #2. This is demonstrated in the, “Properly grasp the second clamp” diagram below. Make sure that your clothing, feet, and the rest of your Copyright 2014 Vestil Manufacturing Co. Page 6 of 12...
  • Page 7 You should always use the procedures developed by your employer for safely handling material. Shackle leans to the left; safety Hook still supports the shackle. Copyright 2014 Vestil Manufacturing Co. Page 7 of 12...
  • Page 8 Step 8: Disengage the load. Rotate the latch lever to unlock the clamp (photos 9 & 10). You might need to wiggle the clamp to loosen the connection between the gripper and the sheet. Pull the clamp free of the immobilized sheet; then disconnect the clamp from the hoist hook. Copyright 2014 Vestil Manufacturing Co. Page 8 of 12...
  • Page 9: Inspections & Maintenance

    Step 3: Perform all adjustments indicated as necessary during any inspection (every lift, frequent, or periodic). Step 4: If other conditions exist which require new/replacement parts to repair, contact Vestil. Deformity, corrosion, rusting, or excessive wear of structural members warrants immediate replacement.
  • Page 10: Label Placement Diagram

    Rev. 9/10/2014 EPC, manual.doc Label placement diagram: Only use the clamp if ALL labels are in place as shown below, readable and undamaged. Contact Vestil to order replacement labels when necessary. Label 675 (applied to back of tag 023): hazards of improper use Tag 023 (connected to pear link via cable tie): rated load information &...
  • Page 11: Limited Warranty

    (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.
  • Page 12 Rev. 9/10/2014 EPC, manual.doc NOTES: Copyright 2014 Vestil Manufacturing Co. Page 12 of 12...

This manual is also suitable for:

Epc-10Epc-20Epc-40Epc-60