Advertisement
6/30/2016
SE/HP S
ERIES
SE/HP-63, SE/HP-98 and
SE/HP-118
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)
the instructions in this manual; or b) information provided on labels affixed to the product.
responsible for any consequential damages sustained as a result of failing to exercise sound judgment while
assembling, installing, using or maintaining this product.
Table of Contents
Hazard identification: explanation of signal words..................................................................................... 2
Safety Guidelines............................................................................................................................... 2
Introduction....................................................................................................................................... 3
Operation....................................................................................................................................... 3
Specifications................................................................................................................................... 5
Inspections & Maintenance................................................................................................................ 6
Trouble Shooting............................................................................................................................... 9
Limited warranty................................................................................................................................ 11
Copyright 2016 Vestil Manufacturing Corp.
V
ESTIL
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
C
H
OMBINED
AND
www.vestilmfg.com
I
NSTRUCTION
M
ANUFACTURING
Fax: (260) 665-1339
P
& E
UMP
LECTRICAL
e-mail:
sales@vestil.com
M
ANUAL
SE/HP-63-AA, SE/HP-98-AA and
SE/HP-118-AA
Page 1 of 11
SE-HP, Manual
C
.
ORP
S
TACKER
Neither is Vestil
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vestil SE/HP Series
Summary of Contents for Vestil SE/HP Series
-
Page 1: Table Of Contents
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) the instructions in this manual; or b) information provided on labels affixed to the product. -
Page 2: Hazard Identification: Explanation Of Signal Words
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized modifications automatically void the Limited Warranty and might make the product unsafe to use. -
Page 3: Introduction
The inventory rack’s or stowage structure’s stability and condition to support the transported load. Operating Elements 1. Pump Handle 2. Power Meter 3. Lift Button 4. Receptacle for Remote Input (optional) 5. Manual Release 6. E-Stop 7. Push / Pull Bars Copyright 2016 Vestil Manufacturing Corp. Page 3 of 11... - Page 4 E-Stop push-button down. Lastly, activate the parking brake by pressing down on the “ON” flange until it is snug, as shown in Figure: De-activating the Brake. Press the “ON” flange to apply brake. Copyright 2016 Vestil Manufacturing Corp. Page 4 of 11...
-
Page 5: Specifications
Speed Unload Lift Motor 12V / 1200W Amps Loaded 94.7 amps Amps Unloaded 54.3 amps Battery 2 x 12V/ 40Ah Battery Charger DC 12/24V, 10amp Weight 560lbs. 32” Width of Aisle Copyright 2016 Vestil Manufacturing Corp. Page 5 of 11... -
Page 6: Inspections & Maintenance
A low viscosity, mineral, machine oil, engine oil or synthetic oil should be used. The oil’s viscosity should be viscous during all operating, ambient temperatures. Under normal temperature conditions, lubricating oils with a viscosity of SAE 20 to SAE 40 are appropriate. Copyright 2016 Vestil Manufacturing Corp. Page 6 of 11... - Page 7 When 33 links of the older, worn chain span the same distance as 34 new links, the chain has stretched 3 percent. The chain needs to be replaced. A 2 percent elongation can be measured comparing 50 worn links with 51 new links using the above procedure. Copyright 2016 Vestil Manufacturing Corp. Page 7 of 11...
- Page 8 It may be necessary to support the lifting gear in a suitable manner to relieve the load chain of any stress. Check the hydraulic fluid level. Replenish as needed. Grease the stacker thoroughly. Copyright 2016 Vestil Manufacturing Corp. Page 8 of 11...
-
Page 9: Troubleshooting
7 to 8 inches. Batteries discharged Check fuses above the motor controller. Charge the batteries. The table continues on the next page. Copyright 2016 Vestil Manufacturing Corp. Page 9 of 11... - Page 10 Verify the fuse is good with an ohm meter. Blown fuse charging If the fuse is good, check the charged battery’s voltage. A fully charged Dead battery battery should be between 12.6 and 13.0 volts. Copyright 2016 Vestil Manufacturing Corp. Page 10 of 11...
-
Page 11: Limited Warranty
(you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.
Need help?
Do you have a question about the SE/HP Series and is the answer not in the manual?
Questions and answers