PXN CB1 Manual

Platform Support

Supported Platform: PC
PC System Requirements: Windows 7/8/10/11

Product List

Usage Instructions

PC Connection

Use the USB data cable to connect the CBI to the computer for use.

RGB Light Power Switch

Toggle the RGB light power switch on the back of the CB1 to turn the RGB lights on or off.

RGB Light Color Switching

Hold the HANDLE button and rotate the ABS knob to cycle through 7 RGB light colors.

RGB Light Brightness Adjustment

Hold the HANDLE button and rotate the TC knob. Rotate clockwise to increase brightness, counterclockwise to decrease brightness.

Mapping Button On/Off

The ESC/ ENTER buttons are mapped to the ESC/ ENTER keys on the keyboard by default.
Hold the HANDLE button and press the ESC/ ENTER button to disable mapping. Repeat the operation to enable it.

Accessory Installation

1. Use the M5 hex screws to attach the clamp to the CB1.
2. Place the CB1 on the table and tighten the clamp.

Product Specifications

• Please read the manual carefully before operation.
• Avoid strong vibrations and heavy impacts.
• Do not disassemble, modify, or repair the product yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in humid, high-temperature, or smoky environments.
• Wien connecting or removing the product, apply appropriate force.
• Children should use this product under adult supervision.