PXN A9 Manual

Product Overview

Accessory List

Installation Method

1. Loosen the knob, adjust the plate to the desired position, then tighten the knob.
   
   
2. Unfold the stand, adjust the telescopic rods to the appropriate position, and tighten the knobs.
   
3. Attach the support rod of the gear shifter plate at the indicated position using the 12mm M6 bolts, the M8 bolts, and W1 nuts.
   
4. Secure the gear shifter plate to the support rod using the 12mm M6 bolts.
   
5. After installation, mount the steering wheel onto the plate. For steering wheels that cannot be secured using clamps, use the 20mm M6 bolts to secure the steering wheel to the plate.
   

Product Specifications

• Please read the user manual carefully and follow all installation and usage instructions before use.
• Ensure the steering wheel stand is installed and used on a stable and secure surface.
• The product structure includes movable cross supports; be careful to avoid getting pinched during installation and use.
• Ensure all screws and fasteners are securely tightened when installing the wheel stand.
• Use moderate force during installation and use.
• Regularly check the product for any damage or loose parts, and replace or repair as necessary.
• Do not use or store this product in extreme environments.
• This product contains small parts and poses a choking hazard.
• This product is not suitable for children under 14 years old.
• Keep this product away from infants and toddlers.
• Use this product with caution. The manufacturer is not responsible for any damage or injury caused by improper use.