PXN A7 Manual

For PXN Racing Wheels

1. Plug the Shifter into PXN racing wheel with male aviation plug to RJ11 registered jack cable.
   
2. The Shifter red indicator will remain ON when connection is successful, and the shifter can be used now.
3. Place the shifter horizontally in an appropriate position.
   
4. Rotate the screw cap to tighten the Shifter.
   

For PC

1. Plug the Shifter into PC USB port with male aviation plug to USB cable.
   
2. The Shifter red indicator will remain ON when connection is successful, and the shifter can be used now.
   * In the games of D-input category, the games will recognize both steering wheel and shifter separately. The shifter can be used by setting it in the games.
3. Place the shifter horizontally in an appropriate position.
   
4. Rotate the screw cap to tighten the Shifter.
   

Product Accessories

• Male Aviation plug to USB cable*1
• Male Aviation plug to RJ11 registered jack cable*1
• Male Aviation plug to PS2 male cable*1

Supported Platforms

• Support Wlndows 7/6/10/11
• PXN Racing Wheels: PXN-V9/V10

Product Specifications

Attention

• Avoid strong vibration, do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in humid, high temperature, olly smoke and other places.
• Please do not throw the product into fire to avoid explosion.
• Children should be under adult's supervision at all times when using this product.
• If you have any problems or suggestions about the product, please contact the seller or the after-services.