Download
Share
Print this page
Advantech AIMB-587 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. AIMB-587
  6. User manual
Advantech AIMB-587 User Manual

Advantech AIMB-587 User Manual

Intel xeon w/core i9/i7/i5/i3 lga1200 micro-atx with triple display, dual gbe lan, dual 10gbe lan, ddr4, sata iii and usb 3.2 gen2
Hide thumbs

Advertisement

Quick Links

Download this manual
User Manual
AIMB-587
Intel® Xeon® W/Core™ i9/i7/i5/i3
LGA1200 Micro-ATX with Triple
Display, Dual GbE LAN, Dual
10GbE LAN, DDR4, SATA III and
USB 3.2 Gen2

Advertisement

loading
Need help?

Need help?

Do you have a question about the AIMB-587 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech AIMB-587

Summary of Contents for Advantech AIMB-587

  • Page 1 User Manual AIMB-587 Intel® Xeon® W/Core™ i9/i7/i5/i3 LGA1200 Micro-ATX with Triple Display, Dual GbE LAN, Dual 10GbE LAN, DDR4, SATA III and USB 3.2 Gen2...
  • Page 2 No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.

  • Page 3: Declaration Of Conformity

     Product Warranty (2 Years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation.
  • Page 4 WG2/L Intel® Pentium® QG2/F/ Processor 3.8G 14nm LGA1200 WG2/L G6400E Intel® Pentium® QG2/F/ Processor 3.2G 14nm LGA1200 WG2/L G6400TE" Intel® Celeron® QG2/F/ Processor 3.2G 14nm LGA1200 WG2/L G5900E" Intel® Celeron® QG2/F/ Processor 3.0G 14nm LGA1200 WG2/L G5900TE" AIMB-587 User Manual...

  • Page 5: Ordering Information

    It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the AIMB-587, check it for signs of ship- ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.
  • Page 6 AIMB-587 User Manual...

  • Page 7: Table Of Contents

    Board Layout: Jumper and Connector Locations........5 Figure 1.1 Jumper and Connector Location ........ 5 Figure 1.2 I/O Connectors ............5 AIMB-587 Board Diagram ................. 6 Figure 1.3 AIMB-587 Block Diagram ........... 6 Safety Precautions ..................6 Jumper Settings ..................7 1.8.1 How to Set Jumpers..............
  • Page 8 Before You Begin..................74 Introduction ..................... 74 Windows 10 Driver Setup ............... 75 Chapter VGA Setup ......... 77 Introduction ..................... 78 Windows 10 VGA Driver Installation ............78 Chapter LAN Configuration ......79 Introduction ..................... 80 AIMB-587 User Manual viii...
  • Page 9 ATX 24-Pin Power Connector (EATXPWR1)........109 A.49 EC Debug Header (J1)................109 A.50 System Indicator LED (JFP3)..............109 A.51 COM2 RS232/RS422/RS485 Selection Pin Header (JSETCOM1) ..110 A.52 COM Box Header (COM1~2) ..............110 A.53 iBMC GPIO Header (GPIO2) ..............111 AIMB-587 User Manual...
  • Page 10 SMBUS to EC Header (IBMC_SMBUS_EC) ......113 A.65 iBMC SMBUS to PCH Header (IBMC_SMBUS_PCH) ......114 A.66 CPU SOCKET LGA 1151 H4 (CPU1)........... 114 A.67 IMVP8 Programming Header (JSMB1)..........114 A.68 ATX 8-Pin Main Power Connector (ATX12V1) ........115 AIMB-587 User Manual...

  • Page 11: Chapter 1 General Information

    Chapter General Information...

  • Page 12: Introduction

    Introduction The AIMB-587 is designed with the Intel Q470E/W480E/H420E for industrial applica- tions that require both performance computing and enhanced power management capabilities. The motherboard supports the Intel® Xeon® W series; Intel® Core™ i9/ i7/i5/i3; Pentium® and Celeron® processor up to 20MB L3 cache and DDR4 3200 MHz up to 128GB (per slot up to 32 GB).

  • Page 13: Input/Output

    480 Mbps and 6 x USB 3.2 Gen1 ports with transmission rates up to 5 Gbps, 4 x USB 3.2 Gen2 ports, with transmission rates up to 10 Gbps. GPIO: AIMB-587 supports 16-bit GPIO from super I/O for general purpose con- ...

  • Page 14: Jumpers And Connectors

    Jumpers and Connectors Connectors on the AIMB-587 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers.

  • Page 15: Board Layout: Jumper And Connector Locations

    M2M1 PCIEX8_1 JCMOS1 FPAUD1 LPC1 JUSBPWR2 SATA2/SATA1 SPDIF1 SATA3/SATA4 PCIEX16_2 LANLED1 SATA6/SATA5 JUSBPWR1 SATA7/SATA8 PCIEX1_1 SPI1_BIOS1 SPI_CN1 KBMS1 JFP2 SMBUS1 VOLT1 JFP1 USB910 USB1314/USB1516 JOBS1+JWDT1 USB1112 USB78/USB56 Figure 1.1 Jumper and Connector Location Figure 1.2 I/O Connectors AIMB-587 User Manual...

  • Page 16: Aimb-587 Board Diagram

    AIMB-587 Board Diagram Figure 1.3 AIMB-587 Block Diagram Safety Precautions Warning! Always completely disconnect the power cord from chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges.

  • Page 17: Jumper Settings

    1.8.2 CMOS Clear (JCMOS1) The AIMB-587 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed.

  • Page 18: Jusbpwr1-2 (Usb Power Selection Connector)

    ATX Mode Default ATX Mode AT Mode 2-3 closed 1-2 closed 1.8.6 JOBS1+JWDT1: Watchdog Timer Output and OBS Beep Table 1.7: JOBS1+JWDT1: Watchdog Timer Output and OBS Beep Pin Name Watch Dog Reset# output System Reset input# AIMB-587 User Manual...

  • Page 19: Jsetcom2: Com2 Rs232, Rs422, Rs485 Selection

    DCDB SOUT [2] COM2_DCD# COM2_SOUT COM2_TXD485- COM2_RXD485+ SIN [B] DTR [B] COM2_SIN COM2_DTR# COM2_TXD485+ COM2_RXD485- RS-232 Mode (Default) (5-6) (7-9) (8-10) (13-15) (14-16) RS-422 Mode (3-4) (9-11) (10-12) (15-17) (16-18) RS-485 Mode (1-2) (9-11) (10-12) (15-17) (16-18) AIMB-587 User Manual...

  • Page 20: Jcaseop_Sw1: Case Open Selection Pin Header

    Jumper position for +12V System Memory The AIMB-587 has four 288-pin memory sockets for 2933/2666/2400 MHz memory modules with maximum capacity of 128GB (Maximum 32GB for each DIMM). AIMB- 587QG2/L supports only non-ECC DDR4 memory modules and do not support regis- tered DIMMs (RDIMMs).

  • Page 21: Cache Memory

    1.11 Cache Memory The AIMB-587 supports a CPU with one of the following built-in full speed L3 caches: 20MB for Intel® Xeon® W-1290E/ TE 16MB for Intel® Xeon® W-1270E/ TE 12MB for Intel® Xeon® W-1250E/ TE 20MB for Intel®...
  • Page 22 AIMB-587 User Manual...

  • Page 23: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 24: Introduction

    USB Ports (LAN1_USB12/LAN2_USB34/LAN3/ LAN4/USB56/78/910/1112/1314/1516 The AIMB-587 provides up to 16 USB ports. The USB interface complies with USB Specification Rev 2.0 supporting transmission rates up to 480 Mbps and Rev 3.0 sup- porting transmission rates up to 5 Gbps, and Rev 3.1 Gen2 supporting transmission rates up to 10 Gbps.

  • Page 25: Usb Power Switch (Jusbpwr1/Jusbpwr2)

    USB Power Switch (JUSBPWR1/JUSBPWR2) The AIMB-587 allows users to set USB power between +5 VSB and +5 V. When the jumper is set as +5 V (2-3 pin), the board doesn't support wake from S3 via keyboard or mouse. If you need to set it to +5 Vsb, you need to modify the jumper (default 1-2 pin).

  • Page 26: Vga/Dp1/Dp2 Connector

    VGA/DP1/DP2 Connector The AIMB-587 includes VGA and DP interfaces that can drive conventional displays. Pin assignments for COM1 and HDMI, DP connectors are detailed in Appendix B. DP max resolution supports 4096 x 2304 @ 60 Hz. VGA max resolution supports 1920 x 1200 @ 60 Hz.

  • Page 27: Serial Ports (Com1~Com6)

    Serial Ports (COM1~COM6) The AIMB-587 supports six serial ports. COM1, COM2, and COM3-6 support RS- 232. COM2 supports RS-232/422/485. JSETCOM2 is used to select the RS-232/422/ 485 mode for COM2. These ports can connect to serial devices, such as a mouse or a printer, or to a com- munications network.

  • Page 28: Ps/2 Keyboard And Mouse Connector

    6-pin mini-DIN connectors (KBMS1, 2.54pitch) is for supporting the PS/2 keyboard and PS/2 mouse by a cable P/N 1700018699. CPU Fan Connector (CPUFAN1) If a fan is used, this connector supports cooling fans of 1500 mA (18 W) or less. AIMB-587 User Manual...

  • Page 29: System Fan Connector (Sysfan1/2/3/4)

    Fan 4 are BOM optional. Please notice that System Fan 3 and System Fan 4 cannot have their rotational speeds detected in the BIOS. Additionally, System Fan 3 will be controlled through System Fan 1, and System Fan 4 will be controlled through Sys- tem Fan 2. AIMB-587 User Manual...

  • Page 30: Front Panel Connectors (Jfp1/Jfp2)

    External speaker (JFP1/SPEAKER) JFP2/SPEAKER is a 4-pin connector for an external speaker. If there is no external speaker, the AIMB-587 provides an on-board buzzer as an alternative. To enable the buzzer, set pins 7 & 10 as closed. AIMB-587 User Manual...

  • Page 31: Power Led And Keyboard Lock Connector

    System On System Off Fast flashes Slow flashes 2.10 Line-Out, Mic-In Connector (AUDIO1) Note! Note: Default audio supports 2 ports. Additionally, there is a BOM option to support 3 ports (Line-in/Line-out/ Mic-in). AIMB-587 User Manual...

  • Page 32: Digital Audio Connector (Spdif_Out1)

    The S/PDIF module should be purchased separately by the end user. 2.12 Serial ATA Interface (SATA1 ~ SATA8) The AIMB-587 features a high-performance Serial ATA III interface (up to 600 MB/s) which eases hard drive cabling with thin, space-saving cables. It is included in the QG2,WG2 sku.

  • Page 33: 8-Pin Alarm Board Connector (Volt1)

    The QG2, WG2 sku can support Intel RAID. 2.13 8-Pin Alarm Board Connector (VOLT1) VOLT1 connects to the alarm board on the chassis. These alarm boards give warn- ings if a power supply or fan fails, or if the chassis overheats. AIMB-587 User Manual...

  • Page 34: Pci Express X16 Slot / Pci Express X8

    2.14 PCI Express x16 Slot / PCI Express x8 The AIMB-587 provides a PCIe x16 slot, which can be added by BOM option to 2 PCIe x8 for users to install add-on cards when their applications require higher graphics performance than the CPU embedded graphics controller can provide.

  • Page 35: Front Panel Audio Connector (Fpaud1)

    I/O module cable. Note! For motherboards with the optional HD Audio feature, we recommend that you connect a high-definition front panel audio module to this con- nector to take advantage of the motherboard’s high-definition audio capability. AIMB-587 User Manual...

  • Page 36: Atx Power Connector (Eatxpwr1, Atx12V1)

    For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 180 W. 2.17 General Purpose I/O Connector (GPIO1) AIMB-587 User Manual...

  • Page 37: Edp/Lvds Connector (Edp1)

    2.18 eDP/LVDS Connector (eDP1) 2.19 EDP Backlight Inverter (INV1) AIMB-587 User Manual...

  • Page 38: E-Key) / M.2 (M-Key)

    2.20 M.2 (E-Key) / M.2 (M-Key) M.2 M-Key 2280 supports the SATA or PCIe x4 interface, and can support  NVMe devices. AIMB-587 User Manual...

  • Page 39: Bios Operation

    Chapter BIOS Operation...

  • Page 40: Introduction

    AIMB-587 setup screens. BIOS Setup The AIMB-587 Series system has AMI BIOS built in, with a SETUP utility that allows users to configure required settings or to activate certain system features. The SETUP saves the configuration in the FLASH of the motherboard. When the power is turned off, the battery on the board supplies the necessary power to pre- serve the FLASH.

  • Page 41: Main Menu

    System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. AIMB-587 User Manual...

  • Page 42: Advanced Bios Features

    3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-587 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration and go to the sub-menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 43 3.2.2.1 CPU Configuration The item shows you CPU specification and feature, the content would be different for different CPUs. 3.2.2.2 Power & Performance AIMB-587 User Manual...
  • Page 44 3.2.2.3 PCH FW Configuration Firmware Update Configuration  – ME FW Image Re-Flash [ Disabled ] AIMB-587 User Manual...
  • Page 45 OS. ACPI Sleep State [ Auto ]  Select ACPI sleep state the system will enter when the SUSPEND button is pressed. S3 Video Repost [ Disabled ]  Enable or Disable S3 Video Repost. AIMB-587 User Manual...
  • Page 46 3.2.2.5 EIO-201 EC Configuration Embedded Controller [EIO-201]  Serial Port 1 Configuration  AIMB-587 User Manual...
  • Page 47 Serial Port 1 Configuration  – Serial Port [ Enabled ] – Device Settings: IO=2F8h; IRQ =3 – Change Settings [ Auto ] – COM Port Mode [ RS-232 Mode ] To select an optimal setting for serial port 1. AIMB-587 User Manual...
  • Page 48 Digital I/O Configuration  – Digital I/O Pins 1 - 16 [ Input ] AIMB-587 User Manual...
  • Page 49 ACPI OS to protect the system from overheating damage. – CPU Warning Temperature [ Disabled ] Use this to set the CPU warning temperature threshold. When the system reaches the warning temperature, the speaker will beep. AIMB-587 User Manual...
  • Page 50 Smart Fan Mode Configuration  CPU FAN Mode [Auto]  The item shows you CPU temperature and fan speed (PWM) information. SYSFAN 1-4 Mode [Auto]  The item shows you system temperature and fan speed (PWM) information. AIMB-587 User Manual...
  • Page 51 3.2.2.7 NCT5124DSEC Super IO configuration Serial Port 3 Configuration  – Serial Port [ Enabled ] – Device Settings: IO=240h; IRQ =5 – Change Settings [ Auto ] To select an optimal setting for serial port 3. AIMB-587 User Manual...
  • Page 52 Serial Port 4 Configuration  – Serial Port [ Enabled ] – Device Settings: IO=248h; IRQ =5 – Change Settings [ Auto ] To select an optimal setting for serial port 4. AIMB-587 User Manual...
  • Page 53 Serial Port 5 Configuration  – Serial Port [ Enabled ] – Device Settings: IO=250h; IRQ =10 – Change Settings [ Auto ] To select an optimal setting for serial port 5 AIMB-587 User Manual...
  • Page 54 Serial Port 6 Configuration  – Serial Port [ Enabled ] – Device Settings: IO=258h; IRQ =10 – Change Settings [ Auto ] To select an optimal setting for serial port 6 AIMB-587 User Manual...
  • Page 55 S5 RTC Wake Settings The item allows you enable or disable system wake up on alarm event. Wake system with Fixed Time [ Disabled ] Note! When enabled, the system will wake up at a specified time. AIMB-587 User Manual...
  • Page 56 3.2.2.9 Serial Port Console Redirection Console Redirection [Disabled]  Enable or disable the console redirection feature. 3.2.2.10 Intel TXT information AIMB-587 User Manual...
  • Page 57 USB Device transfer & reset time-out and delay setting. Mass Storage Devices [ Auto ]  Shows USB mass storage device information. USB PWR OFF Configuration 1-8 [ Disabled ]  Power off USB port 1-8 via BIOS setting. AIMB-587 User Manual...
  • Page 58 3.2.2.12 Network Stack Configuration Enable/Disable UEFI Network Stack Note! When the network stack is set to [enabled], this item must be enabled: LANx PXE OpROM AIMB-587 User Manual...
  • Page 59 3.2.2.13 CSM Configuration CSM Support [Disabled]  AIMB-587 User Manual...

  • Page 60: Chipset Configuration Setting

    Users can display a Chipset Setup option by highlighting it using the <Arrow> keys. All Chipset Setup options are described in this section. The Chipset Setup screens are shown below. The sub- menus are described on the following pages. AIMB-587 User Manual...

  • Page 61: System Agent (Sa) Configuration

    3.3.1 System Agent (SA) Configuration VT-d [ Enabled ]  Disable or enable the VT-d function on MCH. AIMB-587 User Manual...
  • Page 62 Max TOLUD [ Dynamic ]  Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automat- ically based on the largest MMIO length of the installed graphic controller. Fast Boot [Enabled]  Enable or disable Fast Boot support AIMB-587 User Manual...
  • Page 63 Select DVMT5.0 Total Graphics Memory size used by the Internal Graphics Device. Note! When BIOS is set as "Auto", only a single display works under DOS. Note! The triple display can only work under Windows 10; a 2nd and 3rd dis- play will not work under DOS. AIMB-587 User Manual...
  • Page 64 Display Combination List BIOS WES 10 Single Display PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Dual Display VGA+DP1/2 PASS VGA+EDP PASS DP1/2+EDP PASS DP1+DP2 PASS Triple Display VGA+DP1/2+EDP PASS VGA+DP1+DP2 PASS DP1+DP2+EDP PASS AIMB-587 User Manual...
  • Page 65 Root Port Preset Value Per lane for Gen3 Equalization. Gen3 Endpoint Preset Value for each Lane  Endpoint Preset Value Per lane for Gen3 Equalization. Gen3 Endpoint Hint Value each Lane  Endpoint Hint Value Per lane for Gen3 Equalization. AIMB-587 User Manual...

  • Page 66: Pch-Io Configuration

     PCIE Wake [ Disabled ]  Enable or disable PCIE to wake the system from S5. Restore AC power loss [ Power Off ]  This item allows users to select off, on and last state. AIMB-587 User Manual...
  • Page 67  Enable or Disable PCI Express clock gating for each port. DMI Link ASPM Control [ Auto ]  PCIe-USB Glitch W/A [ Disabled ]  PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG Port. AIMB-587 User Manual...
  • Page 68 Set the ASPM Level: Force L0s - Force all links to L0s State: AUTO – BIOS auto configure: DISABLE - Disables ASPM – L1 Substates PCI Express, Advanced Error Reporting [Enabled] – PCIe Speed [ Auto ] Select PCI Express port speed. Note! Items only show up in the 10GbE LAN sku. AIMB-587 User Manual...
  • Page 69 Set the ASPM Level: Force L0s - Force all links to L0s State: AUTO – BIOS auto configure: DISABLE - Disables ASPM – L1 Substates PCI Express, Advanced Error Reporting [Enabled]. – PCIe Speed [ Auto ] Select PCI Express port speed. AIMB-587 User Manual...
  • Page 70 Set the ASPM Level: Force L0s - Force all links to L0s State : AUTO - BIOS auto configure: DISABLE - Disables ASPM – L1 Substates PCI Express L1 Substates settings. – PCIe Speed [ Auto ] Select the PCI Express port speed. AIMB-587 User Manual...
  • Page 71 Set the ASPM Level: Force L0s - Force all links to L0s State: AUTO - BIOS auto configure: DISABLE - Disables ASPM – L1 Substates PCI Express L1 Substates settings. – PCIe Speed [ Auto ] Select PCI Express port speed. AIMB-587 User Manual...
  • Page 72 Set the ASPM Level: Force L0s - Force all links to L0s State: AUTO - BIOS auto configure: DISABLE - Disables ASPM – L1 Substates PCI Express L1 Substates settings. – PCIe Speed [ Auto ] Select the PCI Express port speed. AIMB-587 User Manual...
  • Page 73 3.3.2.2 SATA and RST Configuration AIMB-587 User Manual...

  • Page 74: Security Settings

    Select this option and press <ENTER> to access the sub-menu, and then type in the password. Set the Administrator password. User Password  Select this option and press <ENTER> to access the sub-menu, and then type in the password. Set the User Password. AIMB-587 User Manual...

  • Page 75: Boot Settings

    Quiet Boot [ Disabled ]  If this option is set to disabled, the BIOS displays normal POST messages. If enabled, an OEM logo is shown instead of POST messages. Boot Option #1/#2  Choose boot priority from boot device. AIMB-587 User Manual...

  • Page 76: Save & Exit Configuration

    BIOS setup menu and reboot the computer to take effect of all system configuration parameters. 1.Select Exit Saving Changes from the Exit menu and press <Enter>. The Fol- lowing message appears: Save Configuration Changes and Exit Now? [Ok] [Cancel] 2.Select Ok or cancel. Discard Changes and Reset  AIMB-587 User Manual...
  • Page 77 Defaults if the user's computer is experiencing system configuration problems. Select Restore Defaults from the Exit menu and press <Enter>. Save as User Default  Save all current settings as a user default. Restore User Default  Restore all settings to user default values. AIMB-587 User Manual...
  • Page 78 AIMB-587 User Manual...

  • Page 79: Software Introduction & Service

    Chapter Software Introduction & Service...

  • Page 80: Introduction

    Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
  • Page 81 CPU speed depending on the system loading. System Throttling This refers to a series of methods for reducing power con- sumption in computers by lowering the clock frequency. This API allows the user to adjust the clock from 87.5% to 12.5%. AIMB-587 User Manual...

  • Page 82: Software Utility

    Monitoring is a utility for customers to monitor system health, like voltage, CPU and system temperature, and fan speed. These items are important to a device. If critical errors occur and are not solved immediately, permanent damage may be caused. AIMB-587 User Manual...

  • Page 83: Chipset Software Installation Utility

    Chapter Chipset Software Installation Utility...

  • Page 84: Before You Begin

    Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-587 are located on the Advantech website. (http://support.advantech.com/Support/.) Updates are pro- vided via Service Packs from Microsoft*.

  • Page 85: Windows 10 Driver Setup

    Windows 10 Driver Setup Navigate to the Advantech website, then search for AIMB-587. There you will find the "Chipset" driver. AIMB-587 User Manual...
  • Page 86 AIMB-587 User Manual...

  • Page 87: Vga Setup

    Chapter VGA Setup...

  • Page 88: Introduction

    Before installing this driver, make sure the CSI utility has been installed in your system. See Chapter 5 for information on installing the CSI utility. Navigate to the Advantech website, then search for AIMB-587. There you will find the "Graphics" driver. AIMB-587 User Manual...

  • Page 89: Lan Configuration

    Chapter LAN Configuration...

  • Page 90: Introduction

    Introduction The AIMB-587 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Intel I219LM (LAN1), I211AT (LAN2), offering bandwidth of up to 500 MB/sec, elimi- nating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps.

  • Page 91: Windows® 10 Driver Setup (Intel I219Lm/ Intel I211At)

    Windows® 10 Driver Setup (Intel I219LM/ Intel I211AT) Navigate to the Advantech website, then search for AIMB-587. There you will find the "LAN" driver. AIMB-587 User Manual...
  • Page 92 AIMB-587 User Manual...

  • Page 93: Appendix A Pin Assignments

    Appendix Pin Assignments...

  • Page 94: Displayport1 (Dp1)

    DisplayPort1 (DP1) Signal Signal DP1_0+ DP2_0+ DP1_0- DP2_0- DP1_1+ DP2_1+ DP1_1- DP2_1- DP1_2+ DP2_2+ DP1_2- DP2_2- DP1_3+ DP2_3+ DP1_3- DP2_3- DP1_AUX_EN# DP2_AUX_EN# DP1_AUX+ DP2_AUX+ DP1_AUX- DP2_AUX- DP1_HPD DP2_HPD +V3.3_DP1 +V3.3_DP1 AIMB-587 User Manual...

  • Page 95: Usb 3.1 Stack Connector (Lan1_Usb12)

    RJ-45 + USB 3.1 Stack Connector (LAN1_USB12) Signal Signal VBUS (*) VBUS (*) D_1- D_2- D_1+ D_2+ RX_1- RX_2- RX_1+ RX_2+ TX_1- TX_2- TX_1+ TX_2+ (*) Depends on JUSBPWR2 Jump Setting Signal Signal MDI_0+ MDI_2+ MDI_0- MDI_2- MDI_1+ MDI_3+ MDI_1- MDI_3- AIMB-587 User Manual...

  • Page 96: Usb 3.0 Stack Connector (Lan2_Usb34)

    RJ-45 + USB 3.0 Stack Connector (LAN2_USB34) Signal Signal VBUS (*) VBUS (*) D_3- D_4- D_3+ D_4+ RX_3- RX_4- RX_3+ RX_4+ TX_3- TX_4- TX_3+ TX_4+ (*) Depends on JUSBPWR2 Jumper Setting Signal Signal MDI_0+ MDI_2+ MDI_0- MDI_2- MDI_1+ MDI_3+ MDI_1- MDI_3- AIMB-587 User Manual...

  • Page 97: Port 3 / Port4 Connector (Lan3)

    RJ-45 Port 3 / Port4 Connector (LAN3) Signal Signal MDI1_LAN3_D0+ MDI0_LAN3_D0+ MDI1_LAN3_D0- MDI0_LAN3_D0- MDI1_LAN3_D1+ MDI0_LAN3_D1+ MDI1_LAN3_D1- MDI0_LAN3_D1- MDI1_LAN3_D2+ MDI0_LAN3_D2+ MDI1_LAN3_D2- MDI0_LAN3_D2- MDI1_LAN3_D3+ MDI0_LAN3_D3+ MDI1_LAN3_D3- MDI0_LAN3_D3- MDI1_LAN3_D4+ MDI0_LAN3_D4+ MDI1_LAN3_D4- MDI0_LAN3_D4- LAN3_P1_LED2_ACT# LAN3_P0_LED2_ACT# +V3.3_LAN3 +V3.3_LAN3 LAN3_P1_LED3_1G# LAN3_P0_LED3_1G# LAN3_P1_LED1_10G# LAN3_P0_LED1_10G# AIMB-587 User Manual...

  • Page 98: D-Sub Connector (Vga1)

    D-Sub Connector (VGA1) Signal Signal VCC (+5V) GREEN BLUE DDC DAT HSYNC Advantech defined VSYNC DDC CLK 10G LAN X550-AT Heatsink (LU1_HS1) EDP Panel Voltage Selection (JEDP1) Signal Signal +12V EDP1 VDD +3.3V AIMB-587 User Manual...

  • Page 99: Edp Connector (Edp1)

    EDP Connector (EDP1) Signal Signal TX0- TX3- TX0+ TX3+ TX1- TX1+ AUX- AUX+ TX2- TX2+ EDP_HPD +VDD_EDP(*) +VDD_EDP(*) (*) Depends on JEDP1 Jumper Setting HD Audio Interface (AUDIO1) Signal MIC IN LINE OUT LINE IN AIMB-587 User Manual...

  • Page 100: Edp Backlight Inverter Power Connector (Inv1)

    Signal +12V PRSNT1# +12V +12V +12V +12V SMB_CLK Reserved SMB_DATA Reserved Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ Reserved RX0- DETECT# TX1+ Advantech defined TX1- RX1+ RX1- TX2+ TX2- AIMB-587 User Manual...
  • Page 101 TX5+ TX5- RX5+ RX5- TX6+ TX6- RX6+ RX6- TX7+ TX7- RX7+ Reserved RX7- TX8+ Reserved TX8- RX8+ RX8- TX9+ TX9- RX9+ RX9- TX10+ TX10- RX10+ RX10- TX11+ TX11- RX11+ RX11- TX12+ TX12- RX12+ RX12- TX13+ TX13- RX13+ AIMB-587 User Manual...

  • Page 102: Front Panel Audio Pin Header (Fpaud1)

    Reserved RX15- Reserved A.12 Front Panel Audio Pin Header (FPAUD1) Signal Signal MIC IN-L MIC IN-R FPAUD_DETECT# LINE OUT-R SENSE R1 SENSE LINE OUT-L SENSE R2 A.13 USB Power Selection Header #2 (JUSBPWR2) Signal +VDUAL Advantech defined AIMB-587 User Manual...

  • Page 103: Pci-Express X8 Slot (Pciex8_1)

    +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ Advantech defined RX0- Advantech defined TX1+ Reserved TX1- RX1+ RX1- TX2+ TX2- RX2+ RX2- TX3+ TX3- RX3+ Reserved RX3- Reserved Reserved TX4+ Reserved TX4- RX4+ RX4- TX5+ TX5- AIMB-587 User Manual...

  • Page 104: Hd Audio Interface (Spdif1)

    RX5+ RX5- TX6+ TX6- RX6+ RX6- TX7+ TX7- RX7+ Reserved RX7- A.15 HD Audio Interface (SPDIF1) Signal SPDIF OUT AIMB-587 User Manual...

  • Page 105: Pci Express X16 Slot2 (Pciex16_2)

    Reserved SMB_DATA Reserved Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ PRSNT2# RX0- TX1+ Reserved TX1- RX1+ RX1- TX2+ TX2- RX2+ RX2- TX3+ TX3- RX3+ Reserved RX3- Reserved Reserved Reserved AIMB-587 User Manual...
  • Page 106 Reserved Reserved Reserved Reserved AIMB-587 User Manual...

  • Page 107: Lan Led (Lanled1)

    LAN2 LINK100 +3.3VSB A.18 PCI Express x1 Slot (PCIEX1_1) Signal Signal +12V PRSNT1# +12V +12V +12V +12V SMB_CLK Reserved SMB_DATA Reserved Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ PRSNT2# RX0- AIMB-587 User Manual...

  • Page 108: Keyboard & Mouse Connector (Kbms1)

    A.20 Alarm Board/CMM Power Connector (VOLT1) Signal Signal +5VSB +3.3V -12V +12V A.21 Watchdog Timer Output and OBS Beep (JOBS1+JWDT1) Signal Signal SIO Warning Beep output Watch Dog Reset# output SP1 Buzzer Beep input System Reset input# AIMB-587 User Manual...

  • Page 109: Power Led And Keyboard Lock Pin Header (Jfp2)

    Signal HDD LED+ Power Button+ SPK_P2 HDD LED- Power Button- SPK_P3 SMB_DATA System Reset+ SPK_P4 SMB_CLK System Reset- A.24 Universal Serial Bus Port 7 / 8 (USB78) Signal Signal +V5_USB4 (*) +V5_USB4 (*) USB_D8- USB_D7- USB_D8+ USB_D7+ AIMB-587 User Manual...

  • Page 110: Universal Serial Bus Port 5 / 6 (Usb56)

    USB_D8+ USB_D7+ (*) Depends on JUSBPWR2 Jumper Setting A.26 Dual Port USB 3.0 Header (USB1314) Signal Signal +V5_USB1314 USB_D4+ RX3- USB_D4- RX3+ TX4+ TX3- TX4- TX3+ RX4+ USB_D3- RX4- USB_D3+ +V5_USB1314 (*) Depends on JUSBPWR1 Jumper Setting AIMB-587 User Manual...

  • Page 111: Dual Port Usb 3.0 Header (Usb1516)

    USB_D2+ RX1- USB_D2- RX1+ TX2+ TX1- TX2- TX1+ RX2+ USB_D1- RX2- USB_D1+ +V5_USB1516(*) (*) Depends on JUSBPWR1 Jumper Setting A.28 USB Power Selection Header #1 (JUSBPWR1) Signal +VDUAL Advantech defined A.29 CMOS Battery Connector (BAT1) Signal VBAT AIMB-587 User Manual...

  • Page 112: Universal Serial Bus Port 11 / 12 (Usb1112)

    Universal Serial Bus Port 11 / 12 (USB1112) Signal Signal +V5_USB5 (*) +V5_USB5 (*) USB_D12- USB_D11- USB_D12+ USB_D11+ (*) Depends on JUSBPWR1 Jumper Setting A.31 SM Bus Connector from PCH (SMBUS1) Signal +5VSB SMB CLK SMB DAT A.32 PCH Heatsink (HS1) AIMB-587 User Manual...

  • Page 113: Dual Port Usb 3.0 Header (Usb910)

    RX6+ USB_D9- RX6- USB_D9+ +V5_USB6(*) (*) Depends on JUSBPWR1 Jump Setting A.34 Intel ME Header (JME1) Signal AZA_SDO_R +V3.3_DUAL A.35 SPI BIOS Flash Socket1 (SPI1) Signal Signal MOSI MISO SCLK WP# / IO2 HOLD# / IO3 +V3.3_SPI AIMB-587 User Manual...

  • Page 114: Coms Mode Selection (Jcoms1)

    COMS Mode Selection (JCOMS1) Signal VBAT RTC RESET# A.37 SPI Pin Header (SPI_CN1) Signal Signal +3.3VSB SCLK MISO MOSI A.38 SPI BIOS Flash Socket2 (SPI2) Signal Signal MOSI MISO SCLK WP# / IO2 HOLD# / IO3 +V3.3_SPI AIMB-587 User Manual...

  • Page 115: Serial Ata Interface Connector (Sata1~8)

    A.39 Serial ATA Interface Connector (SATA1~8) Signal A.40 SATA Power Connector (SATA_PWR1) Signal +V12 A.41 Low Pin Count Interface Connector (LPC1) Signal Signal CLK (24MHz) RESET# FRAME# +3.3V SMB CLK SERIRQ SMB DAT +5VSB AIMB-587 User Manual...

  • Page 116: M.2 M-Key Connector (M2M1)

    DEVSLP (O) PERn0/SATA-B+ PERp0/SATA-B- PETn0/SATA-A- PERST# (O)(0/3.3V) or N/ PETp0/SATA-A+ CLKREQ# (I/O)(0/3.3V) or PEWAKE# (I/O)(0/3.3V) or REFCLKn REFCLKp Connector Key Connector Key Connector Key Connector Key Connector Key Connector Key Connector Key Connector Key SUSCLK(32kHz) (O)(0/ 3.3V) AIMB-587 User Manual...

  • Page 117: Com3 Ri# Selection Pin Header (Jsetcom3_V1)

    RST# [4] TXD [4] CTS# [4] DTR# [4] RI# [4] DCD# [5] DSR# [5] RXD [5] RST# [5] TXD [5] CTS# [5] DTR# [5] RI# [5] DCD# [6] DSR# [6] RXD [6] RST# [6] TXD [6] CTS# [6] AIMB-587 User Manual...

  • Page 118: 16-Bit General Purpose I/O Pin Header (Gpio1)

    GPIO9 GPIO2 GPIO10 GPIO3 GPIO11 GPIO4 GPIO12 GPIO5 GPIO13 GPIO6 GPIO14 GPIO7 GPIO15 +5VSB +5VSB A.46 Case Open Selection Pin Header (JCASEOP_SW1) Signal Normal Open Advantech defined Normal Close A.47 Case Open Connector (JCASE1) Signal Case Open AIMB-587 User Manual...

  • Page 119: Atx 24-Pin Power Connector (Eatxpwr1)

    ATX 24-Pin Power Connector (EATXPWR1) Signal Signal +3.3V +3.3V +3.3V -12V PSON# PWROK +5VSB +12V +12V +3.3V A.49 EC Debug Header (J1) Signal A.50 System Indicator LED (JFP3) Signal System indicator LED + System indicator LED - AIMB-587 User Manual...

  • Page 120: Com2 Rs232/Rs422/Rs485 Selection Pin Header (Jsetcom1)

    Signal UART_SIN [2] RXD_RS485 UART_SIN [2] RXD_RS422 UART_SIN [2] RXD_RS232 DCDB SOUT [2] COM2_DCD# COM2_SOUT COM2_TXD485- COM2_RXD485+ SIN [B] DTR [B] COM2_SIN COM2_DTR# COM2_TXD485+ COM2_RXD485- A.52 COM Box Header (COM1~2) Signal Signal DCD# DSR# RST# CTS# DTR# AIMB-587 User Manual...

  • Page 121: Ibmc Gpio Header (Gpio2)

    GPIO Header (GPIO2) Signal Signal SLP_S3# GPIO0 GPIO1 GPIO2 GPIO3 Power Button SYS_RESET# A.54 AT/ATX Mode Selection (PSON1) Signal +3.3V A.55 EC Programming Header (CN1) Signal Signal A.56 DDR4 UDIMM Socket B2 (DIMMB2) Please see the JEDEC STANDARD. AIMB-587 User Manual...

  • Page 122: Ddr4 Udimm Socket B1 (Dimmb1)

    Please see the JEDEC STANDARD. A.60 System Fan #2 Connector (SYSFAN2) Signal SYSTEM FAN VCC SYSTEM FAN SPEED SYSTEM FAN PWM A.61 System Fan #1 Connector (SYSFAN1) Signal SYSTEM FAN VCC SYSTEM FAN SPEED SYSTEM FAN PWM AIMB-587 User Manual...

  • Page 123: System Fan #4 Connector (Sysfan4)

    System Fan #4 Connector (SYSFAN4) Signal SYSTEM FAN VCC SYSTEM FAN SPEED SYSTEM FAN PWM A.63 System Fan #3 Connector (SYSFAN3) Signal SYSTEM FAN VCC SYSTEM FAN SPEED SYSTEM FAN PWM A.64 iBMC SMBUS to EC Header (IBMC_SMBUS_EC) Signal DATA AIMB-587 User Manual...

  • Page 124: Ibmc Smbus To Pch Header (Ibmc_Smbus_Pch)

    A.65 iBMC SMBUS to PCH Header (IBMC_SMBUS_PCH) Signal DATA A.66 CPU SOCKET LGA 1151 H4 (CPU1) A.67 IMVP8 Programming Header (JSMB1) Signal DATA AIMB-587 User Manual...

  • Page 125: Atx 8-Pin Main Power Connector (Atx12V1)

    A.68 ATX 8-Pin Main Power Connector (ATX12V1) Signal Signal +12V +12V +12V +12V AIMB-587 User Manual...
  • Page 126 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2024...