Aiwa XR-M75 Operating Instructions Manual page 19

Main unit
CX-ZR554
FM
tunw' section
Tuning range
Usable :sensitivity(IHF)
Antenna terminals
AM tuner section
Tuning Ivange
Usable sensitivity
Antenna
Amplifier section
Power output
Total halrmonic distortion
Inputs
Ckrtputs
Cassette deck section
Track format
Frequerlcy response
Flecording system
Heads
87.5 MHz
to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530
kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350
pV/m
Loop antenna
50 W + 50 W (50
Hz -20
kHz, THD
less than 1 %, 6
ohms)
0.05 % (25 W, 1
kHz, 6 ohms)
VIDEO/AUX/PHONO IN: 500 mV
SPEAKERS: accept speakers of 6
ohms or
more
SURROUND SPEAKERS: accept
speakers of 8-16 ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz – 10000
Hz
AC bias
Deck 1: Recording/playback head
x 1, erase head x 1
Deck 2: Playback head x 1
Compact disc player section
Laser
Semiconductor laser (k= 780 nm)
D-A
converter
1
bit dual
$ignal-to-noise ratio 85 dB (1 kHz, OdB)
Harmonic distortion 0.05 %
(1 kHz, O dB)
Wow and flutter
Unmeasurable
Generwl
Power requirements
120 V AC, 60
Hz
Power consumption
125W
Dimensions of main unit 360 x 394.5x 381 mm
(W XHXD)
(14'/4 X 155/8 X 15 h.)
\rVeightof main unit 8.6 kg (18 Ibs 15
OZ)
Speaker svstem SX-ZR55
-. ~,
.,,, .,
—
Cabinet type
Speakers
impedance
Output sound pressurs level
Dimensions (W x H x D)
Weight
3 way, bass reflex
Woofer:
170 mm (63/4 in.) cone type
Tweeter:
60 mm (23/t3in.) cone type
Super tweeter:
20 mm
(13/16 in.) Ceramk typf?
6 ohms
87 dB/Wlm
280 x 444x 272 mm
(11'/8
X Ii"/z X lr)3/4 ill.)
4.5 kg (9 Ibs 15
OZ)
Specifications and external appearance are subject to change withcwt
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings frc}m
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation,
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to raciio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio~V technician
for help.
CAUTION
Modifications or adjustments
to this product, which are not
expressly approved by the manufacturer, may void the user's right
or authority to operate this product.
ENGLISH 18