Advertisement
Available languages
Available languages
q
U ,=
I
!
d'
m
— CD DIGITAL OUT
(OPTICAL)
— ;~lD~~A~W
F{efer to the operating instructions of the connected equipment
for deta,lls,
* The c:mnecting cords are not supplied. Obtain the necessary
connecting cords.
@ Consult your local Aiwa dealer for optional equipment.
This unit can input analog sound signals through these jacks.
iJse a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to VIDEO/AUX/PHONO
IN R jack, and the
white plug to VIDEO/AUX/PHONO
IN L jack,
\/Vhen connecting
a turntable
Use an Aiwa turntable equipped with a built-inequalizer amplifier.
This unit can output CD digital sound signals through this jack,
IJse arl optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.),
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
POWER-
To play equipment connected to VIDEO/AUX/PHONO
proceed as follows.
1 Press VIDEO/AUX/PHONO.
"VIDEO" appears on the display.
2 Play the connected equipment.
IN jacks
0
To change a source name on the display
When VIDEO/AUX/PHONO
is pressed, "VIDEO" is displayed
initially. It can be changed to '(AUX,""PHONO or "TV.
With the power on, press POWER while pressing VIDEO/ALIX/
PHONO.
Repeat the procedure to select one of the names.
'When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
ENGLISH 16
Advertisement
