General Information; Standards And Directives; Warranty - GANN BL COMPACT B 2 Operating Instructions Manual

3 General Information

3.1 Standards and Directives

This measuring instrument fulfils the requirements of the applicable European and national
directives (2014/30/EU) and standards (EN 61010). Appropriate declarations and documentation are
held by the manufacturer.
To ensure trouble-free operation of the measuring instrument and operational reliability, the user
must carefully read and understand the operating instructions.

3.2 Warranty

The measuring instrument may only be operated under the specified climatic conditions. These are
listed in chapter 2.1 "Technical Data of the Hydromette".
This measuring instrument may only be used under the conditions and for the purposes that it has
been designed for. Operational reliability and functionality are no longer ensured if the device is
modified or adapted. Gann Mess- u. Regeltechnik GmbH shall not be liable for any damage arising
from such modifications or adaptations. The risk is borne solely by the user.
The measuring instrument and any accessories may only be properly used as described in these
instructions. Keep the device and accessories out of the reach of children!
The device must not be stored or operated in air that is corrosive or contains solvents!
The notes and tables in these instructions regarding permitted or normal humidity conditions in
practice and the general definitions of terms have been taken from the specialist literature.
Therefore, the manufacturer cannot guarantee the correctness. The conclusions to be drawn from
the measurement results depend for each user on the individual circumstances and the knowledge
gained from his professional experience.
The measuring instrument may be used in the residential and commercial sectors.
The measuring instrument may only be stored in the packaging provided by the manufacturer or
available from the manufacturer as an accessory. The manufacturer accepts no liability for damage
that may occur to the device or the sensor system as a result of non-compliance.
Gann Mess- u. Regeltechnik GmbH accepts no liability whatsoever for damage caused by non-
compliance with the operating instructions or by breach of the duty of care during transport,
storage and handling when operating the device, even if this duty of care is not specifically
referred to in the operating instructions.
®
Version 2.0 12
Hydromette BL Compact B 2