Switching The Device On And Off; Setting Menus - GANN BL COMPACT B 2 Operating Instructions Manual

5.2 Switching the Device On and Off

The device is switched on and off by pressing the "On / Off" button
measuring menu or main menu. The measuring process can be carried out here
"Measuring menu (main menu)"].
Figure 5-4: Scan mode display

5.3 Setting Menus

The following menu items can be selected one after the other by repeatedly pressing the "Down"
button:
1. Measuring Menu (main menu): The measuring process can be performed here.
2. Material setting: The material can be selected here.
3. Alarm value setting: A measured value threshold can be set here, above which an acoustic
signal sounds.
4. Maximum value display: The largest measured value is shown here.
5. Memory Menu: The last 5 measured values are stored here. The oldest value is overwritten
after each measurement.
The menu items are selected in reverse order by pressing the "Up" button.
®
Hydromette BL Compact B 2
Last measured value in digits
"Hold" symbol; Measured value is held;
Ready for measurement
Material index "0" - Scan mode
Version 2.0
. The device starts in the
[see Chapter 5.3.1
16