Care, Maintenance and Inspection
CAUTION
Stop using the product in the case of visible damage, strong odour development or excessive
overheating of components.
Only use original accessories.
Changes to the device and technical modifications are not permitted without the written consent of
the manufacturer.
All connection options and the device itself must not be sprayed directly or indirectly with water
when cleaning (connections depend on the device! e.g. BNC-, 2.5 mm, 3.5 mm jack receptacle and
mini-USB port).
Our recommendation: To ensure functionality, have all your measuring equipment checked by the
manufacturer every 2–3 years (depending on the frequency of use).
Troubleshooting
Do not repair the device yourself. Contact the manufacturer if the device is not functioning properly.
Disposal
Electrical equipment, accessories and packaging must not be disposed of together with household
waste (only for EU countries) and must be disposed of in compliance with the European Directive
2012/19/EU on waste electrical and electronic equipment and its implementation in accordance with
national law. Electrical equipment that has reached the end of its service life must be collected
separately and sent to an environmentally compatible recycling facility.
The WEEE symbol draws attention to the need for disposal.
The device contains a battery. Batteries must not be disposed of with normal household waste. They
may contain toxic heavy metals and are subject to the hazardous waste ordinance. For this reason,
dispose of the battery at a local collection point for the recycling of waste electrical and electronic
equipment. Caution, there is a risk of explosion if the wrong type of battery is inserted. Handle used
batteries according to the manufacturer's instructions.
Gann Mess- u. Regeltechnik GmbH accepts no liability for damage caused by non-compliance with
the operating instructions or by violation of a duty to care during transport, storage or operation of
the instrument, even if this duty to care is not specifically discussed in the operating instructions.
9
Remove the battery before cleaning the product. Do not use abrasive
cleaning cloths or chemicals to clean the product as these can damage the
surface.
Version 2.0
®
Hydromette
BL Compact B 2
Need help?
Do you have a question about the BL COMPACT B 2 and is the answer not in the manual?