GANN BL COMPACT B 2 Operating Instructions Manual page 10

2 Specifications
2.1 Technical Data
Hydromette
Display:
Display resolution:
Response time:
Storage conditions:
Operating conditions:
Power supply:
Types that can be used:
Dimensions:
Weight:
Protection class:
Protection rating:
2.2 Prohibited Environmental Conditions

Condensation. humidity continuously too high (> 85% R.H.) and wetness

Permanent presence of dust and combustible gases. vapours or solvents
Ambient temperatures continuously too low (< 0 ℃)

Ambient temperatures continuously too high (> +50 °C)

2.3 Transport- & Storage Conditions
Die Hydromette BL Compact B 2 may only be stored in the packaging provided by the manufacturer
or available from the manufacturer as an accessory. The manufacturer shall not accept any liability
or warranty for damage that may occur to the device or to the sensor system as a result of non-
compliance.
In particular, avoid keeping or storing the devices in foams not supplied by the
manufacturer, as these can damage the sensors due to possible outgassing and
result in incorrect measurements.
INFORMATION
®
Hydromette BL Compact B 2
LCD segment display with three lines
0.1% for humidity
0.1 digits in scan mode
< 2 s
+ 5 to + 40 °C
- 10 to + 60 °C (for a short time)
0 to + 50 °C
- 10 to + 60 °C (for a short time)
< 85 % R.H. non-condensing
9-V-block battery
Types 6LR61 and Type 6F22
225 x 50 x 30 (L x W x H) mm
approx. 180 g
III
IP20
Version 2.0 10