Turning Off The Computer; About The Module Bay; Swapping Devices While The Computer Is Turned Off - Dell Inspiron 4150 Owner's Manual

HINT: You must use
CD-R discs to burn music
CDs that you want to
play in regular stereos.
CD-RW discs do not play
in most home or car
stereos.
HINT: If you are having
difficulties turning off
your computer because a
program stops
responding, see "General
Program Problems" on
page 70.
38 Setting Up and Using Yo ur Computer
Insert a blank CD into the CD-RW drive and close the tray.
6
The recording starts automatically.
After the recording completes, click OK.
7

Turning Off the Computer

NOTICE: To prevent data loss, you must turn off your computer through the
Start menu rather than by pressing the power button.
Save and close any open files and exit any open programs.
1
Click the Start button and then click Turn off Computer.
2
Click Turn off.
3
The computer automatically turns off after the shutdown process finishes.

About the Module Bay

You can install optional devices such as a floppy drive, CD drive, CD-RW
drive, DVD drive, DVD/CD-RW drive, second hard drive, or second battery
in the module bay.
NOTICE: To prevent damage to the docking connector, do not remove or
replace devices while the computer is connected to a docking device.
Swapping Devices While the Computer
Is Turned Off
Save and close any open files, exit any open programs, and shut down
1
the computer (see "Turning Off the Computer" on page 38).
If the computer is connected (docked) to a docking device, undock it.
2
See the documentation that came with your docking station for
instructions.
Close the display and turn the computer over.
3
Slide and hold the latch release, and pull the device out of the bay.
4
NOTICE: To prevent damage to devices, place them in a travel case when they
are not installed in the computer. Store devices in a dry, safe place, and avoid
pressing down on them or placing heavy objects on top of them.