Infineon PSOC 4100S Plus Manual

Prototyping kit

Hide thumbs Also See for PSOC 4100S Plus:

Manual (38 pages)

page of 45

/ 45
Bookmarks

Quick Links

Download this manual

CY8CKIT-149 PSOC

4100S Plus Prototyping Kit

™

guide

About this document

Scope and purpose

This guide helps you get acquainted with the CY8CKIT-149 PSOC

4100S Plus Prototyping Kit. The document

™

explains the kit operation, describes the out-of-the-box (OOB) example and its operation, and the hardware

details of the board.

Intended audience

This kit is intended for all technical specialists familiar with the PSOC

4 MCU and CAPSENSE

™

User guide

Please read the sections "Important notice" and "Warnings" at the end of this document

002-20729 Rev. *G

www.infineon.com

2024-12-19

Need help?

Do you have a question about the PSOC 4100S Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for Infineon PSOC 4100S Plus

Page 1 Intended audience This kit is intended for all technical specialists familiar with the PSOC 4 MCU and CAPSENSE ™ ™ User guide Please read the sections "Important notice" and "Warnings" at the end of this document 002-20729 Rev. *G www.infineon.com 2024-12-19...
Page 2 Boards provided by Infineon Technologies. The design of the Evaluation Boards and Reference Boards has been tested by Infineon Technologies only as described in this document. The design is not qualified in terms of safety requirements, manufacturing and operation over the entire operating temperature range or lifetime.
Page 3 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ Safety precautions Safety precautions Note: Please note the following warnings regarding the hazards associated with development systems. Table 1 Safety precautions Caution: The evaluation or reference board contains parts and assemblies sensitive to electrostatic discharge (ESD).
Page 4 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ Table of contents Table of contents About this document ..............1 Important notice .
Page 5 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ Table of contents Trademarks ................44 Disclaimer .
Page 6 ™ ™ ™ a set of tools that enables you to integrate Infineon devices into your existing development methodology. If you are new to PSOC 4 and the ModusToolbox software IDE, see the AN79953 - Getting started with PSOC ™...
Page 7 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 1 Introduction Figure 1 CY8CKIT-149 PSOC 4100S Prototyping Board ™ User guide 002-20729 Rev. *G 2024-12-19...
Page 8 Figure 2 CY8CKIT-149 PSOC 4100S Prototyping Kit quick start guide ™ Inspect the kit’s contents; if you find any part missing, go to Infineon's Support Page for assistance. Getting started This guide helps you get acquainted with the CY8CKIT-149 PSOC 4100S Plus Prototyping Kit.
Page 9 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 1 Introduction Board details The PSOC 4100S Plus Prototyping Board has the following features: ™ • PSOC 4100S Plus device U2 (CY8C4147AZI-S475) ™ • PSOC 4100S Plus I/O headers J1 and J2 ™...
Page 10 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 1 Introduction Figure 3 Board pinout Table 2 Board pinout details PSOC 4 pin Primary onboard Secondary onboard Connection details ™ function function Ground Hardware Reset VDDA Power VDDD Power P0.0 GPIO (table continues...) User guide 002-20729 Rev.
Page 11 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 1 Introduction Table 2 (continued) Board pinout details PSOC 4 pin Primary onboard Secondary onboard Connection details ™ function function P0.1 BTN SHIELD P0.2 BTN_TX P0.3 GPIO P0.4 WCO IN P0.5 WCO OUT P0.6 ECO IN P0.7...
Page 12 UART_RX UART Receive P7.1 UART_TX UART Transmit Additional learning resources Infineon provides a wealth of data on the PSOC 4 product webpage to help you select the suitable PSOC ™ ™ device for your design and to help you quickly and effectively integrate the device into your design. Learn how...
Page 13 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Kit operation This chapter provides an overview of the features of the PSOC 4100S device and a quick review of the OOB ™ project preprogrammed in this kit. It also provides the steps to create a project and program/debug using the ModusToolbox software.
Page 14 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Legend Microcontroller Connectivity User LED Prog Select Sensors Switch AIROC™ Bluetooth ® Non-IFX Part Kitprog3/ UART PSOC™ 4100S PSOC™ Plus 4100S Plus No-Load AIROC™ Bluetooth ® User LED Mode Switch AIROC™...
Page 15 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Figure 6 PSOC 4100S Plus Prototyping Board top view ™ The PSOC 4100S Plus Prototyping Kit is simple in design and provides complete access to develop applications ™ using the PSOC 4100S Plus device family.
Page 16 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Table 3 (continued) Peripheral details Sl. No. Peripheral Description KitProg3 (PSOC 5LP) The PSOC 5LP device (CY8C5868LTI-LP039), serving as KitProg3, ™ ™ programmer and debugger is a multifunctional system that includes a SWD programmer, (CY8C5868LTI-LP039, U1) debugger, USB-I2C bridge, and USB-UART bridge.
Page 17 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Table 3 (continued) Peripheral details Sl. No. Peripheral Description KitProg3 programming mode Use this button to switch between various modes of operation selection button (SW3) of KitProg3. Note that this board supports only CMSIS-DAP BULK mode.
Page 18 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Figure 8 CAPSENSE button operation with LED indication ™ Touch the slider with the finger and observe that LED 5, LED 6, LED 7, LED 8, LED 9, and LED 10 turn ON based on touch position, as shown in Figure 9 Figure 9...
Page 19 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Connect the board to the PC using the USB cable through the KitProg3 USB connector (J8). The kit enumerates as a USB composite device if you are connecting it to the PC for the first time. KitProg3 operates in CMSIS-DAP BULK mode;...
Page 20 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Figure 12 Creating a new application: Choose Board Support Package Select the required application and click Create, as shown in Figure The right pane will display the code example description and the link to view the file on README GitHub.
Page 21 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation To build and program a PSOC 4100S Plus device application, follow these steps: ™ In the Project Explorer tab, select the <App_Name> project In the Quick Panel tab, scroll to the Launches section, and click the <App_Name> Program (KitProg3_MiniProg4) configuration, as shown in Figure 14 Figure 14...
Page 22 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 2 Kit operation Figure 15 Debugging the code example For a detailed explanation on how to debug using ModusToolbox software, see the “Program and debug” ™ section in the Eclipse IDE for ModusToolbox user guide.
Page 23 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Hardware Schematics See the schematic files available on the kit webpage. Functional description This section describes the individual hardware blocks. The kit comes with a PSOC 4100S Prototyping Board, ™ which consists of the PSOC 4100S device, KitProg3 programmer/debugger and bridge, CAPSENSE buttons...
Page 24 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 16 Schematic of PSOC 4100S Plus device ™ 3.2.1.1 PSOC 4100S Plus device power supply system ™ The power supply system on this board is dependent on a power source for most applications, you can use the 5 V supply from the USB connection to power the system.
Page 25 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Caution: It is important to understand that this prototyping kit does not have any onboard ESD protection circuitry. Therefore, the power source for the PSOC 4100S Plus Prototyping Kit must be of high quality to make ™...
Page 26 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 17 PSOC 4100S Plus Prototyping Kit broken into four parts ™ 3.2.1.4 Header connections • Functionality of the J1 and J2 headers (target board): The target PSOC 4100S Plus board contains two single inline headers (J1 and J2). These headers are both ™...
Page 27 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware The KitProg3 and target boards each contain a 1x5-pin header. These headers provide a physical connection between the two devices. Specifically, the connection includes the SWD interface, required to ® program/debug the target PSOC 4100S Plus device and the AIROC Bluetooth...
Page 28 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 20 J6 and J7 headers Table 6 Pin details of J6 header Function Connection details J6_01 VBUS Power J6_02 Ground J6_03 P12.5 GPIO J6_04 P12.0 GPIO/I2C_CLK J6_05 P12.1 GPIO/I2C_SDA J6_06 P12.7 GPIO/UART_RX...
Page 29 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware 3.2.1.5 Reset button When the reset button is pressed, the XRES line of the PSOC 4100S Plus device is pulled to ground, which ™ resets the target device. Figure 21 Reset (RST) switch 3.2.2 PSOC...
Page 30 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 22 Schematic of PSOC 5LP-based KitProg3 ™ 3.2.2.1 KitProg3 onboard target voltage measurement PSOC 5LP of KitProg3 uses an ADC to measure the onboard target voltage. There is a voltage divider before the ™...
Page 31 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 23 Schematic of KitProg3 onboard target voltage monitoring circuit 3.2.2.2 KitProg3 programming mode selection button and status LED Use the SW3 button to switch between various modes of KitProg3 operation (from CMSIS-DAP HID to BULK mode, enabling the boot loader mode).
Page 32 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware 3.2.2.3 USB-UART bridge The KitProg3 on the PSOC 4100S Plus Prototyping Kit can act as a USB-UART bridge. The UART lines between ™ the KitProg3 and the target are hardwired on the board, through the snappable area, with UART_RX assigned to P7[0] and UART_TX assigned to P7[1] on the target PSOC 4100S Plus device.
Page 33 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware 3.2.3 CAPSENSE ™ The PSOC 4100S Prototyping Board consists of the following: ™ • CAPSENSE buttons and their corresponding LEDs ™ Three CAPSENSE buttons (BTN0, BTN1, and BTN2) are provided on a breakout board to demonstrate the ™...
Page 34 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 28 Schematic of CAPSENSE slider and their corresponding LEDs ™ 3.2.3.1 Capacitive sensing 3.2.4 System capacitors The CY8CKIT-149 PSOC 4100S Plus Prototyping Kit has eight capacitors in addition to power supply decoupling ™...
Page 35 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware Figure 29 System capacitors circuit diagram 3.2.5 User LEDs The PSOC 4100S Prototyping Board has a blue user LED (LED1) connected to P3[4] of the PSOC 4100S device. ™ ™ Figure 30 User LED's schematic 3.2.6...
Page 36 10 x 10 x 1.8 mm, fully certified, programmable module designed for ease of use ® and reduced time to market. It contains an Infineon AIROC Bluetooth LE chip, two crystals, a chip antenna, a ™...
Page 37 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware ® Figure 32 AIROC Bluetooth LE connections ™ ® The AIROC Bluetooth LE module includes the following connections to PSOC 4100S and KitProg3: ™ ™ • UART connections to PSOC 4100S Plus through zero-ohm resistors R17 and R18 (see ™...
Page 38 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ 3 Hardware ® Table 8 (continued) AIROC Bluetooth LE connections ™ ® AIROC Bluetooth PSOC 4100S KitProg3 Description ™ ™ BLE_SCL, P5_1 P3_0 P12_0 I2C_SCL BLE_SWDIO, P0_6 P12_2 SWDIO BLE_SWDCLK, P0_7 P12_3 SWDCLK P0_4 P3_6...
Page 39 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ Glossary Glossary Analog-to-Digital Converter Bridge Control Panel ® Bluetooth Low Energy Bill of materials Board Support Package Command-line interface CMOD Modulator capacitor Comparator CMSIS-DAP ® Cortex Microcontroller System Interface Standard - Debug Access Port Self-capacitance Mutual-capacitance CTANK...
Page 40 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ Glossary Ground GPIO General-purpose input/output Inter-integrated circuit IDAC Integrated Design Environment Integrated development environment Knowledge Based Article Light emitting diode Out-of-the-box PSOC ™ Programmable system-on-chip Successive Approximation Register Serial Communication Block SRAM Static Random Access Memory Serial wire debug TCPWM...
Page 41 Updated Software Installation chapter • Updated “Install Software” • Updated Figure 2-2. • Updated Kit Operation chapter • Updated “Programming and Debugging the Target PSoC 4100S Plus Device” • Updated “Programming Using PSoC Creator” • Updated Figure 3-2. • Updated “USB-UART Bridge”...
Page 42 Updated Appendix chapter • Updated “Hardware Details” • Updated “Power Supply System” • Updated “Measure PSoC 4100S Plus Device Current Consumption” • Updated description. 12/28/2017 • Updated Figure 1-3, Figure 1-4, Figure 3-3, Figure 4-1, Figure 4-2, Figure 4-6, Figure 4-9, Figure 4-10 User guide 002-20729 Rev.
Page 43 CY8CKIT-149 PSOC 4100S Plus Prototyping Kit guide ™ Revision history Document Date Description of changes revision 2024-12-19 • Migrated to IFX template • Renamed PSoC to PSOC ™ ™ ® • Renamed EZ-BLE to AIROC Bluetooth ™ ™ • Removed PSoC Creator sections ™...
Page 44 4100S Plus Prototyping Kit guide ™ Trademarks Trademarks ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Infineon is under license. User guide 002-20729 Rev. *G 2024-12-19...
Page 45 Infineon Technologies, Email: erratum@infineon.com Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be Document reference expected to result in personal injury.

This manual is also suitable for:

Cy8ckit-149