PLEASE READ FIRST
NOTE
•
This document does not apply to Ultra Heat "B" Models (GMV-XXWL/B-T(U)
Although like Mini-Split heat pump systems, MultiPRO Heat Pump Systems have key installation differences.
1. Line Voltage Power Supply to Indoor and outdoor units are separate circuits.
2. Service disconnects at each indoor unit, units without heater kits can use a two-pole toggle switch.
3. Communication wire is 18-2 stranded wire.
4. Indoor connected capacity requirement is 50 to 135 % of the outdoor unit capacity.
DO NOT DISCARD. STORE THIS INFORMATION IN A SAFE PLACE
FOR FUTURE REFERENCE.
Need help?
Do you have a question about the MULTIPRO GMV-V WL/C-T Series and is the answer not in the manual?