Download
Share
Print this page
Alliance Laundry Systems A105 ARIES Programming Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. A105 ARIES
  6. Programming manual
Alliance Laundry Systems A105 ARIES Programming Manual

Alliance Laundry Systems A105 ARIES Programming Manual

Washer-extractors
Hide thumbs

Advertisement

Quick Links

Download this manual
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Washer-Extractors
Refer to Page 9 for Model Identification
www.alliancelaundry.com
Aries Control
Part No. D1631ENR8
September 2022

Advertisement

loading
Need help?

Need help?

Do you have a question about the A105 ARIES and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems A105 ARIES

Summary of Contents for Alliance Laundry Systems A105 ARIES

  • Page 1 Washer-Extractors Aries Control Refer to Page 9 for Model Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D1631ENR8 www.alliancelaundry.com September 2022...
  • Page 3 Programming the Sequence Time ......................28 Signal ..............................29 © Copyright 2024, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 4 Put Soap into the Soap Dispenser ......................61 Starting a Wash Program........................61 Selection of a New Program after the Original Program Has Started...........61 The Active Program ..........................61 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 5 Fault Messages ............................79 How to Handle Fault Messages......................79 Failure Message Overview........................80 Service Menu ............................82 Faults Menu (Service Faults) ......................83 Toolbox Menu............................83 Diagnostic Program..........................84 Test Sequence.............................86 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 6 Failure 77: Time for Heating Blocking is Out ...................99 Failure 80: Time for Dispensing Liquid Detergents is Out..............99 Failure 85: RTC Low Battery ......................99 Failure 95: Watch Dog ........................99 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 7 Instructions for Replacing the Programmer Boards................105 Instructions for Installing New Software ....................106 Electronic Coin Selector Electronic Coin Selector ............................................107 Electronic Coin Selector Type EMP 500.12 v4..................107 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 8 A nominal voltage, if loaded or not must work in tion of the machine type letters. the range ±10% with a maximum permanent frequency devi- © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 9 IAC135J IY65_ARIES JLA16C_ARIES IAC180J IY70_ARIES JLA22_ARIES IAC240J IY80_ARIES JLA22C_ARIES IAC280J IYB180J JLA30_ARIES IAC332J IYC065J JLA30C_ARIES IAC520J IYC080J JLA40_ARIES IAE080J IYC105J JLA40C_ARIES IAE105J IYC135J JLA50_ARIES continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 10 IAU280J IYQ080J WMA203E_ARIES IAU332J IYQ105J WMA253E IAU520J IYQ135J WMA253E_ARIES IAW080J IYQ180J WMA303E IAW105J IYQ240J WMA303E_ARIES IAW135J IYQ280J WMA403E IAW180J IYU065J WMA403E_ARIES IAW240J IYU080J WMA504EP continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 11 35 kg / 80 lb / 332 L (150 G) IA332M 28 kg / 70 lb / 280 L IY280 continues... continues... Table 1 Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 12 Introduction Machine Type in Configuration Menu Dry Load Capacity Machine Type 52 kg / 120 lb / 520 L IA520N continues... Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 13 START (ADVANCE function for the OPL version) CHM2451N_SVG CONFIRM THE SELECTION (ENTER) CHM2452N_SVG CANCEL THE SELECTION CHM2453N_SVG MOVE UP CHM2454N_SVG MOVE DOWN CHM2455N_SVG SELECTION OF ADDITIONAL FUNCTIONS CHM2456N_SVG continues... Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 14 Control Identification Main Menu © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 15 Control Identification Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 16 • Inspecting the wash program by the view function. • Special optional applications. The CONFIGURATION Menu is Designated for : The PAYMENT Menu is Designated for: © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 17 1. Use the LEFT and CANCEL THE SELECTION buttons to enter (change) a logical value or to select an item from a list. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 18 Step 99 Wash Wash Sequence Sequence Drain/ Drain/ Extraction Extraction Sequence Sequence Tumble Tumble Tumble . . . Tumble Sequence Sequence Sequence Sequence CHM1685R Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 19 • Warm or Hot water : Cold and Hot Inlet Valves must be Then program all the related functions of the Drain/Extraction programmed sequence. Available functions • Sequence Time (length of step) © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 20 In other cases, the pro- water recycling supply must be connected to inlet gram will give poor washing quality. valve 5 or 7. C015 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 21 9.51 gal [36 l] 10.17 gal 11.10 gal [42 13.74 gal [52 14.53 gal [55 19.28 gal [73 21.13 gal [80 [38.5 l] continues... Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 22 2.77 gal 3.17 gal [12 3.30 gal 3.78 gal 4.49 gal [17 4.46 gal [10.5 l] [12.5 l] [14.3 l] [16.9 l] continues... Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 23 (2) 19.55 gal (2) 28.66 gal [48.5 l] [55 l] [65.5 l] [71.7 l] [91.4 l] [99.7 l] [74 l] [108.5 l] continues... Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 24 63.80 gal [156.5 l] [241.5 l] 42.93 gal 67.10 gal [162.5 l] [254 l] 44.38 gal 69.87 gal [168 l] [264.5 l] continues... Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 25 10.5 kg / 25 lb / 105 L 13.5 kg / 30 lb / 135 L 18 kg / 40 lb / 180 L continues... Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 26 10.5 kg / 25 lb / 105 L 91-149 1005 (G-factor 350) 10.5 kg / 25 lb / 105 L 1035 91-149 1075 (G-factor 400) continues... Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 27 24 kg / 55 lb / 240 L (G- 91-149 factor 100) 24 kg / 55 lb / 240 L (G- 91-149 factor 175) continues... Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 28 1, 2, • For a Cooldown Sequence, the programmed time corre- 3, 4, 5, 6, 7, 8. sponds with the time for decreasing the water temperature. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 29 • The program interruption will always occur at the end of a grammed supply time. step. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 30 Language selection: English, Spanish, French,… List Service Interval 3000 Number of cycles at which maintenance is required. 1 - 9999 9999: the servicing interval is ignored continues... Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 31 If Wait for Temperature has been enabled, Error 13 will appear in the 10 - 20 Minutes control's display if the water temperature doesn't increase by 5.4°F [3°C] within the programmed amount of time. continues... Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 32 When enabled, this feature allows the soap dispenser valves to open in- 0 - 20 Seconds (Off) dividually for the programmed time. continues... Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 33 • Press the ARROW DOWN button to select the Configura- Only a qualified technician should change the tion Menu. configuration set up. An incorrect configuration can cause injuries and serious machine damage. C028 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 34 There is only one correct setting for machine type. If the wrong machine type was selected, replace the display board or send it to the factory for repair. continues... Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 35 During inverter parameters loading it must be selected cor- rect motor type installed in machine. Only Hardmount machine 7.5kg / 20 lb /80L. continues... Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 36 No / Yes valve. If this second drain valve is a normal Closed drain Valve, then drain valve 2 must be Selected Yes. continues... Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 37 Thus you will make sure, that the machine is not operated with incorrect water levels or drum rotational speed. continues... Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 38 1 Hygienic Cycle ... 2 Program Mode Lock ... 3 Program Lock ... 4 Weighing ... 5 Data Export/Import ... 6 Exit ... CFD1440R_SVG Figure 11 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 39 Enter a 4 digit value for the Password and press ENTER. NOTE: The Password will not be requested if it has not been set. continues... Table 11 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 40 1 BRIGHT WASH 86°F [30°C] IN- TENS (Unlocked) 2 COLORED WASH 104°F [40°C] INTENS (Locked) 15 HOT WASH 194°F [90°C] (Un- locked) EXIT continues... Table 12 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 41 This will reduce the liquid soap consumption of the washing machine. Exit Return to Advanced Menu continues... Table 13 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 42 • The main menu is now available. CFD1373R_SVG • In the configuration menu select the Payment Menu. Figure 13 The advanced menu contains a list of extra menus with special functions: © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 43 Special prices are used if they are enabled and a corresponding input of Price the control board is activated (such as by timer). continues... Table 15 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 44 CRD : Card based central payment system connected to the External : External payment unit that operates with free con- programmer via free contacts. tacts (relay). © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 45 • With this function you can select the extraction speed (revo- Available Additional Functions lutions of the spinning sequence). Prewash © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 46 Initializing the Machine How to Create and Adjust a Wash Program Figure 16 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 47 Use the hidden navigation buttons LEFT and RIGHT CANCEL THE SELEC- TION to select the program number. Numbers from 1 to 15 can be selected. continues... Table 16 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 48 Display Message Information Select Step Number: 1 Use the hidden navigation buttons LEFT and CANCEL THE SELECTION to select the program number. continues... Table 17 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 49 • First the wash part must be selected, item by item can be pro- gramming the Wash Sequences. grammed. • Each program step contains a wash part and a drain/spin part. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 50 Refer to Table 7 The suggested water level depends on the machine Type. Refer to Table 7 The suggested RPM depends on the machine Type. continues... Table 18 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 51 Level Normal Low The suggested water level depends on the machine Type. Refer to Table 7 continues... Table 19 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 52 • The drain step after the Hot wash must be put on NO C048 DRAIN. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 53 • Wash • No temperature can be programmed as a Rinse is only dedi- • Cooldown cated for cold water. • Rinse • Final Rinse © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 54 • Wash • No temperature can be programmed as a Last Rinse is only • Cooldown dedicated for cold (hard) water. • Rinse • Final Rinse © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 55 Table 22 The Soak Sequence • Final Rinse • Soak • Prewash • Spray • Wash • No wash • Cooldown • Rinse © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 56 • No standard water inlets can be programmed in this function. • Rinse • The liquid will be injected based on soap supply program- • Final Rinse ming. • Soak © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 57 The Drain Sequence • Drain • Static Drain • Extract • Reversing Drain • No Drain © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 58 The Extract Sequence Time. (for 0 Minutes the Extract sequence will be skipped) (programmable in steps of 0.5 Minutes) Exit Return to Edit Program Menu. continues... Table 26 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 59 (tilt) function will be activated. The drum is reversing while the water is drained. C051 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 60 (for 0 Minutes the Static Drain sequence will be skipped) (program- mable in steps of 0.5 Minutes) Exit Return to Edit Program Menu. continues... Table 29 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 61 Use the ADDITIONAL FUNC- TION SELECTION button and carry out the setting. End the © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 62 "Wait for temperature" should be Program End selected in the Initialization Menu. • The time on the display counts down until 0. C068 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 63 C070 How to Handle Power Interruptions Refer to Installation/Operation/Maintenance manual. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 64 Get into the Setup Mode . 2. Press the navigation arrow DOWN to move into the screen with counters. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 65 Direct Inlet (External liq- Water uid soap) Inlet Valve 8: Hot Soft Wa- Soap Dis- Wash - liquid penser Com- partment "III" continues... Table 30 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 66 • H: High extraction speed (625 - 1165 RPM) (depending on • A = 12 seconds, 12 seconds Action the machine capacity) • R = 3 seconds, 3 seconds Rest © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 67 9 minutes Slowdown Tumble W (5 seconds / 30 seconds 5 seconds) (Models with- out pump drain) 5 minutes (Models with pump drain) continues... Table 32 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 68 9 minutes Slowdown Tumble W (5 seconds / 30 seconds 5 seconds) (Models with- out pump drain) 5 minutes (Models with pump drain) continues... Table 33 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 69 Temperature Level Time R.P.M (x) Soap Supply Step 1 Prewash / wash 1-5-7 86°F [30°C] 5 minutes W (normal) 1=30 seconds 2-3-4-8* continues... Table 35 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 70 R.P.M (x) Soap Supply No Prewash Step 1 Main wash 86°F [30°C] 20 minutes W (normal) 2=30 seconds 1-2-3-5-6-8 2-3-5* Drain 30 seconds continues... Table 36 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 71 30 seconds Step 2 Rinse 1 4 minutes W (normal) 1-2-7 Spin 1 minute Step 3 Rinse 2 4 minutes W (normal) 1-2-7 continues... Table 37 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 72 W (normal) 1-2-7 Spin 1 minute Step 4 Rinse 3 6 minutes W (normal) 3=30 seconds 1-4-7 1-7* Final spin/Spin 9 minutes Slowdown continues... Table 38 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 73 1-7* Final spin/Spin 2.5 minutes Slowdown Tumble W (gentle) 30 seconds (Models with- out pump drain) 5 minutes (Models with pump drain) continues... Table 39 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 74 1-7* Final spin/Spin 12 minutes Slowdown Tumble W (normal) 30 seconds (Models with- out pump drain) 5 minutes (Models with pump drain) continues... Table 41 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 75 104°F [40°C] 14 minutes W (normal) 2=30 seconds 1-2-3-5-6-8 2-3-5* Drain 1 minute Step 2 Rinse 1 4 minutes W (normal) 1-2-7 continues... Table 43 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 76 1-2-7 Spin 1 minute Step 3 Rinse 2 EL(1) 4 minutes W (normal) 3=30 seconds 1-4-7 1-7* Final spin/Spin 9 minutes Slowdown continues... Table 44 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 77 1) EH – Cabinet Freestanding 10.5 kg / 25 lb / 105 L models, Cabinet Hardmount 10.5 kg / 25 lb / 105 L (G-factor 200) models continues... Table 45 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 78 9 minutes Slowdown Tumble W (5 seconds / 30 seconds 5 seconds) (Models with- out pump drain) 5 minutes (Models with pump drain) continues... Table 46 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 79 "TOO HOT" or "WATER IN CAGE" will be dis- DEPENDING ON THE FAILURE TYPE THE COMPUT- played. ER WILL START A SPECIFIC PROCEDURE: WHEN SAFETY IS INVOLVED © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 80 Heat. Time Heating time failure Full stop + request for continue While heating Too Hot Too Hot Full stop + tumble While heating continues... Table 47 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 81 Not locked inner door Full stop Whole cycle Heating Time Out Heating on Hold Signal Failure Full stop + tumble Wash step continues... Table 47 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 82 "Software XXX Version: 772.100.0." The SERVICE menu can only be accessed when the machine is in standby (the power is switched on, but no program is © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 83 • If the Input state is Off, the Input signal is low. 20 Input 20 Off • If the input state is On, the Input signal is high. continues... Table 49 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 84 How to Get into the Diagnostic Menu • Turn the washing machine to the setup mode. Refer to sec- tion How to Get into the Setup Mode . © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 85 • Select the Diagnostic Program menu at the Service menu. Exit Service Menu CFD1436R_SVG Diagnostic Prog ... Figure 31 CFD1435R_SVG • Press START if you want to start the diagnostic program. Figure 30 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 86 The water is drained by drain valve 1 Inlet I8 The machine takes water by inlet 8 Drain 1 The water is drained by drain valve 1 continues... Table 50 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 87 Rinse seconds R=3 seconds utes Spin Spin 4.5 min- utes Slowdown 1 minute - Tumble A=12 seconds 30 sec- R=3 seconds onds continues... Table 51 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 88 If the wrong machine type is selected the Check if the right machine type is selected wrong outputs will be activated in the Configuration Menu. continues... Table 52 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 89 The error is generated when the safety switch is switched more than 10 times (for a short period of time) or for a period over © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 90 If the door switch is broken or of the door switch. The door malfunctions replace the door switch is a normal open con- switch. continues... tact. Table 55 continues... Table 57 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 91 1. Check the functioning of If the door switch is broken or quence fails. the door lock switch. doesn't function correct: re- place the door lock. continues... Table 60 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 92 Initialization menu. The rubber hose must be fixed with a flexible clamp on the electronic water level sensor. . C078 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 93 Failure 14: Heating Time Failure When after x minutes the target temperature is not reached (for a machine set as wait for heat): Message 14 will be displayed. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 94 If the coin drop micro contact of coin drop 1. or optocoupler is not func- continues... tioning 100% : replace the Table 69 coin drop. continues... Table 67 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 95 If you see some damage : re- contactor is activated. ken: replace the contactor. ally. place the wash computer. continues... continues... Table 72 Table 71 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 96 As a result the inverter will not work in a correct © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 97 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 98 Select the right machine type tionality of drum door. plate placed on the back of in the Configuration Menu. the machine. continues... continues... Table 85 Table 83 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 99 Error log register. If this occurs often, ask the help of a that the washing machine wait (at the Wash Sequence) to add technician. Liquid Supply. It will until the Liquid Supply Central Dispens- © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 100 Err 316 in the error log. Err CPU CPU Fault Communication error of built in CPU. Replace inverter. continues... Table 88 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 101 Err ILF* Input phase failure 1 phase of the 3-ph input was lost for more than 1 second. Repair the 3-phase power supply. continues... Table 88 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 102 * This option or function is not used. If you have this error anyway do the following : 1. Reload the inverter parameters. 2. If the fault is persistent, contact Technical Support. continues... Table 88 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 103 In such case the contactor must not be replaced. The In- mal high friction. verter must be reset by a longer power interruption. continues... Table 91 © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 104 Problem with card reader payment system. Table 95 Failure 600-628: Software Errors Software errors must never occur. If a software error message occurs inform the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 105 8. Close the cover plate of the washing machine. 9. Now you can Switch On the power supply. 10. The display should illuminate. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 106 • All Custom Settings will be lost. 5. The display shows information that the software is being copied from the flash drive into the programmer board. © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...
  • Page 107 • The electronic coin selector is capable of accepting or block- value of coin 1 must be set to 0.10 EUR. ing coins. If the electronic coin selector is accepting invalid © Copyright, Alliance Laundry Systems LLC - Part No. D1631ENR8 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Iax332jIyw080jA135 ariesIax520jIyw105jA180 aries ... Show all