SpeedAlert 24 Quick Start Guide
Thank you for purchasing an All Traffic Solutions SpeedAlert 24 Radar Message Sign. This
quick start guide will show you how to install, power, and configure your new sign.
Before you take to the road
Perform the following setup steps in your shop, before you take
the SpeedAlert to the roadside.
Step 1 Choosing a site, below
At the roadside
Step 2: Configuring the SpeedAlert locally, on the next page
Note: For trailer setup details, please see your trailer quick start
guide.
Scan or click the QR code for an ATS 5 Trailer and sign
Step 1 Choosing a site
Next, you'll need to set up a site for your SpeedAlert so that you can collect
and store traffic data and generate reports. Here are the basic steps and
options you'll need to perform:
A.
Select a street location: Identify your planned traffic study site to
start collecting traffic data so that you can create reports. Carefully
consider the physical characteristics of the roadway to ensure
optimal performance of the sign and solar panel. See
physical location, on the next
B.
Create and assign a Site in TraffiCloud to hold your data:
Option 1: If you have a Traffic Suite Software subscription,
i.
On the TraffiCloud Web portal, click Sites and then click the plus sign
ii.
Assign the site to your device: On the Equipment page for your device, go to General > Assigned Site.
Option 2: If you have a license to use the TraffiCloud mobile app, on the navigation menu, tap the Site.
Management tab and then click the Plus button
Option 3: If you'll be using the TraffiCloud Sign Manager application on your PC, on the TraffiCloud Web portal,
click Sites and then click the plus sign
upload it using the application.
For detailed instructions:
See the video "Creating and Assigning Sites" (select a video based on your sign type) from the
l
Hub.
If you have the Traffic Suite Software, in the TraffiCloud User Guide see "Creating a Site" and "Assigning a Site to
l
your device."
ATS | Chantilly, VA | United States | Tel: 1-866-366-6602 | Email:
Copyright © 2024 | All Traffic Solutions, Inc.® | SpeedAlert 24 Quick Start Guide, ver. 1.02 | PN 4800243 | All rights reserved.
installation video >>>
page.
to create a new Site. Then, assign your data to this Site when you
support@alltrafficsolutions.com
Selecting a
| Web:
to create a new Site,
TraffiCloud Training
www.alltrafficsolutions.com
Need help?
Do you have a question about the SpeedAlert 24 and is the answer not in the manual?
Questions and answers