All Traffic Solutions ALPR Camera-Ready Trailer Quick Start Manual

ALPR Camera-Ready Trailer Quick Start Guide
Thank you for purchasing an ALPR Camera-Ready Trailer. This guide will show you how to set up
your new trailer. Please follow all of the steps in order. The trailer is typically outfitted with an
ATS SpeedAlert 24 Radar Message Sign or InstAlert 24 Variable Message Sign. Onboard
equipment is powered by maintenance-free AGM lead acid batteries and either the 190W or
380W solar panel assist option. For TraffiCloud documentation, subscribers should refer to the
TraffiCloud User Guide. On the TraffiCloud Help menu, click the Getting Started Guides link.
Local Bluetooth access only customers with data-enabled signs should refer to the
configuration sections of the Quick Start Guides for your signs, which include details
about using TraffiCloud Sign Manager for Windows.
Initial ALPR Camera-Ready Trailer setup
IMPORTANT: Review the
then perform the following setup steps:
Step 1: Inspecting and charging the trailer's batteries on page 4
Step 2: Hooking up the trailer on page 5
Step 3: Setting up at the roadside on page 6
Step 4: Powering the sign and third party devices on page 7
Step 5: Securing the trailer on page 8
After deployment, see Packing up the trailer for redeployment on
Check over the trailer
Upon receiving your new ALPR Camera-Ready Trailer, check to ensure that you have all of the items ordered. If you
notice any damaged or missing items, contact ATS
Here's a summary of what's typically included with your trailer. Check your packing slip for precise order details.
The ALPR Camera-Ready Trailer includes the following:
The trailer, with four pairs of maintenance-free AGM lead acid
»
batteries and either the 190W or 380W solar panel assist option,
Depending on the solar panel options selected, it will also include
»
either a solar controller, and low-voltage disconnect to prevent
deep discharging, running on a lower voltage than intended, or
overcharging,
An additional locking battery box for expanded battery capacity,
»
including third-party system equipment area with access panel
and optional recessed camera compartment,
A SpeedAlert 18 or 24 Radar Message Sign or InstAlert 18 or 24
»
Variable Message Sign, or Shield 15 Radar Sign (sold separately).
A 12-VDC AC smart charger,
»
This ALPR Camera-Ready Trailer Quick Start Guide. All setup and
»
quick start (installation) guides are also posted to the ATS
Customer Support page.
For more details, consult the latest
ATS | Chantilly, VA | United States | Tel: 1-866-366-6602 | Email:
Copyright © 2024 | All Traffic Solutions, Inc.® | ALPR Camera-Ready Trailer Quick Start Guide, ver. 1.02 | PN 4800270 | All rights reserved.
Safe Trailering Guidelines on the next page
Customer Support
What's included
ATS Trailers page
and
page 8.
immediately.
»
»
»
»
on our website.
support@alltrafficsolutions.com
What you'll need
A vehicle equipped with a trailer hitch
for towing a load of up to 1,500 lbs.
(680 kg), including a standard
hitch-mount with bracket for the safety
chain, 2-inch (5-cm) ball, and flat, 4-way
wiring socket. Other connection
options are also available.
A heavy duty three-pronged outdoor-
rated extension cord.
A partner for trailer hookup.
Legal licensing or registration as
required for your jurisdiction.
| Web: www.alltrafficsolutions.com