All Traffic Solutions InstAlert 24 Hardware Quick Start Manual

InstAlert 24 Hardware Quick Start Guide
Thank you for purchasing an All Traffic Solutions InstAlert 24 Variable Message Sign. This
hardware quick start guide will show you how to set up, power, and configure your new sign.
For details about using the sign, go to www.alltrafficsolutions.com/support, where there are
complete user manuals that you can use online or download and print.
[Figure 1] InstAlert 24 with Portable Post and PowerCase

Unpack the equipment

Remove the sign, power source, such as PowerCase, and any other optional equipment from the boxes.

Charge the PowerCase (if provided)

Charge the PowerCase before deployment. Follow the instructions and warnings provided with the PowerCase,
making sure to select AGM mode on the charger module, as shown here:
RISK OF INJURY OR DEATH. T o avoid the buildup of explosive gases, leave the lid of the
W :
ARNING
PowerCase OPEN while charging.
The PowerCase should only be charged in a controlled environment.
See also: Configure the InstAlert on page 3.
ATS | Chantilly, VA | United States | Tel: 1-866-366-6602 | Email:
Copyright © 2022 | All Traffic Solutions, Inc.® | Document ver. 1.0 | All rights reserved.
sales@alltrafficsolutions.com | Web: www.alltrafficsolutions.com