Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Copeland NetCom Card
Summary of Contents for Copeland NetCom Card
- Page 1 USER MANUAL NetCom Card Installation and Programming Guide...
- Page 2 Copeland 1065 Big Shanty Road NW, Suite 100 Kennesaw, GA 30144 USA 770-425-2724 • 1-800-829-2724 www.copeland.com Email: ColdChain.TechnicalServices@copeland.com...
- Page 3 TABLE OF CONTENTS 1 USING THE NETCOM CARD WITH EINSTEIN.................... 1 1.1 Working with the Network Administrator .............................1 1.2 IP Address Specification ..................................1 1.3 Network Considerations ..................................1 1.4 Ethernet Network Wiring and Wire Types ............................1 1.5 Installing the NetCom Card................................1 1.6 Configuring the Einstein ..................................2...
- Page 4 Using the NetCom Card with Einstein The NetCom Card Ethernet Controller (P/N 370-4000) is a device that plays a key role in providing TCP/IP connectivity over Ethernet to devices that normally communicate over an RS-232 serial link. In the case of Einstein and UltraSite, this means that communications that normally occur over a direct serial or modem connection can be achieved over an existing LAN or WAN.
- Page 5 As in the case of an internal modem, the NetCom Card will be connected to the Einstein that is designated as the site alarm annunciator (See Section 1.6). Figure 1-2 - NetCom Card Jumper Setup Confirm that the jumpers on J1, J2 and J3 are in place according to Figure 1-2.
- Page 6 In the IP Address field, enter the IP address to be associated with the NetCom Card. The network 6. Clear out the Phone field and enter the address and port administrator determines this IP address (not a host information of the UltraSite PC waiting for alarms.
- Page 7 Select Edit Communications Information from the site pop-up menu to bring up the Configuration menu. In the Connection control group, select the Einstein TCP/IP option. In the Network Settings control group, the Address field will automatically have the IP address of the NetCom Card. Click OK.
- Page 8 The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. Copeland reserves the right to modify the designs or specifications of such products at any time without notice.
Need help?
Do you have a question about the NetCom Card and is the answer not in the manual?
Questions and answers